FIREYE BLV512 BLV 512 BLV-512

Product Description:

Two serial connectors to simplify RS-485 multi-dropping and host communications Several analog or digital command interfaces: Indexing (absolute with the Homing feature, incremental, or
registration)10 Volt analog interface—position, velocity, or torque control Presets (from one to eight

binary inputs)—torque or velocity control Quadrature encoder digital interface—electronic gearing position follower Step/Direction digital interface—position control CW/CCW (step up/step down) interfaceposition control Operating mode override—alternate movement interface Host command digital

interface The ULTRA 100/200 drives host command protocol provides optional drive configuration using the drive serial communications interface. This powerful feature allows your controller to access all of the drive digital controls using sequences of ASCII characters. The protocol includes error checking to

ensure the integrity of the transmitted commands. In installations that have multiple axes, up to 32 ULTRA 100/200 drives can be addressed by a host computer. These drives communicate with the host
computer using a four-wire RS-485 serial interface. The host command protocol includes specific drive

addressing, which allows the host to communicate with all the connected drives concurrently.

Contact Information:

Contact:Miya ( manager)

Email :sales@mooreplc.com
Q Q: 2851195450
Skype: miyazheng520
Mobile:86-18020776792 ( what's app )

Related Product Recommendation:

When the drive mounted HIM is supplied, it will be connected as Adapter 1 (see Adapter in Chapter 2) and visible from the front of the drive. The HIM can be divided into two sections; Display Panel and Control Panel. The Display Panel provides a means of programming the drive and viewing the various

operating parameters. The Control Panel allows different drive functions to be controlled. Refer to Figure and the sections that follow for a description of the panels.Important: The operation of some HIM functions will depend upon drive parameter settings. The default parameter values allow full HIM

functionality.HIM OPERATION When power is first applied to the drive, the HIM will cycle through a series of displays. These displays will show drive name, HIM ID number and communication status. Upon
completion, the Status Display will be shown. This display shows the current status of the drive (i.e.

“Stopped,”“Running,” etc.) or any faults that may be present (“Serial Fault,” etc.). If the HIM software is Series A version3.00

ULTRA 100 and 200 drives are feature-rich, high-performance drives that offer the flexibility to handle a wide range of applications. You can set up the ULTRA 100/200 drives as indexing drives, velocity servo drives, stepper drives, or master encoder followers. With the DeviceNet option, you can remotely commission and reprogram ULTRA 100 drives. In addition, you can use the ULTRA 100/200
drives host command protocol to set up multiple drives. Available in seven power ranges, theULT RA100/200 drives can be mated to four high-performance brushless servo motor lines. Ultra Master software, a Windows-based interface, provides you with a familiar programming environment and a powerful commissioning tool for all ULTRA 100/200 drives.ULTRA 200 positioning drives deliver full-featured flexibility and impressive power and performance. Each ULTRA 200 drive provides:115 to 230V AC single phase input (single phase or three phase for the 75 amp version, three phase only for the 150 amp version) Phase-to-phase and phase-to-ground short circuit protection An internal resistive shunt A built-in auxiliary AC input (to power logic only) Built-in power supplies (including 24V I/O supply)—no external sourcerequired (except AC line) The ability to drive sinusoidal AC brushless motors An DC bus available externally for power leveling or for use of shared power supplies

SMC HE Control Unit Assy INR-498-P033 0190-18419

SMC PF2W300-A Digital Flow Display 0190-17810 Lot Of (7) Used, Working

SMC NCDQ2B50-UIA980090 Pneumatic Cylinder lot of 11 working

SMC INR-496-016B Thermo Chiller PV4-6/4-DTBSC3 missing parts as-is

Hitachi 3-841437 SMC Air Cylinder CDQ2B40-01-59469 Qty3

SMC US5833 12-Port Pneumatic Manifold Assembly AMAT 0190-06402 Lot of 4 Working

SMC REA32-Z2727-375 Sine Sain Rodless Cylinder lot of 4 working

SMC Cylinder NCDQ2WB50-50DC 3020-00225 Lot of 7 New

SMC LFU20-0250-DAN00243 PID Flow Sensor Assembly Kit AMAT 0620-05264 New

SMC CM01-563 Hydrogen Leak Detector 0190-08893 New

TEL ACT 8 SMC Thermo-Con INR-244-216A Power Supply Working

SMC NCDQ2B80-UIA990939 Pneumatic Cylinder Lot of 6 Used Working

SMC 10823000 Pneumatic Manifold Assembly VQ110 Lot of 8 Used Working

SMC Pneumatic Cylinder With Shaft US13394 Used Working

SMC REBR25-350N-X2139 Pneumatic Sine Rodless Cylinder Lot of 3 Used

SMC VV5Q11-08-DAJ00314 8-Port Pneumatic Manifold AMAT 0190-23114 Lot of 3 Used

SMC LFU20-1600-DAN00243 Flow Sensor Assembly AMAT 0620-05233 New

NT intergrated flow controller 6500-xx-F03-D12-K-P2-U2-M19, 0-1500 ml/min

NT intergrated flow controller 6500T2-F02-D12-A-P1-U1, 0-250 ml/min, NEW

NEW SWAGELOK 6LVV-ALD6HFR4-P-CS-NV lots of 2

CHNT NB1-63 C1, NB1 CIRCUIT BREAKER

Tylan 2900 series MFC, FC-2900V, Ar, 500 SCCM, S9115

10 new AMAT 3090-00229 BoH Hexagon Head M5 x 3

ALTECH CORP. 8906.6 DIN RAIL FUSE MOUNT TERMINAL, TYPE SAK S3/35, 6675.2

Varian 06887001 Assembly Motor Drive Control

RT0300-2929 MECHANICAL ASSEMBLY

NEW Perlast 22-294910-00 Oring, white perlast, 3.989 x 0.070

VAT RECTANGULAR GATE, SLIT VALVE MONOVAT 0200X-AE24-1002, VARIAN M2000

Lot of 6 LITTELFUSE V251BA60, METAL OXIDE VARISTOR

Novellus 951479 Cable, motor power

Novellus 951337 Cable, motor power

2 PUV0047-5 power supply HOYA-SCHOTT, UV light source,

3 Banner D12SN6FP Fiber Optic sensor switch

Chemraz 9312-SC520, 2-312, Compound 520, 0.600 x 0.210 inch

Bearing, WFR Roller, MESA 2B-10-241, Used, Lot of 4

Nozzle FLT 80787-50 95Deg@500psi, Lot of two, New

7 RF Low freq silver plated connector AMP, 330830 = 5, 330830-8=2

The use of the product:

1.Power industry,

2.the elevator industry,

3.Experienced technichal support team.