ABB Module YPQ112A ABB YPQ112 A Control Board NEW in sealed box

Product Description:

In order to avoid measurement errors, it is absolutely necessary, to lead the cores to the Pt100 sensors in the same cable. The cores must have the same cross section. Per channel, a twisted pair is used (for the two terminals of the Pt100 sensors) plus a single core (half of a twisted pair) for the connection to AGND1. Depending on the configured operating mode, the measured value is assigned linearly as follows the return wire AGND1. In the operating mode "Pt100 in 3-wire configuration" two adjacent analog inputs belong together (e.g. EW 6,00 and EW 6,01). For configuration, both inputs must be configured to the desired operating mode, see configuration table Fig. The constant current of the one channel flows through the Pt100 resistance sensor, the constant current of the other channel through one of the wires.
The basic unit 07 KT 94 calculates the measuring value from the two voltage drops and stores it under the odd address

Related Product Recommendation:

Product's Character:

IResolution in the PLC system: The measured values are converted with a resolution of
12 bits, i.e. 11 bits plus sign for voltage and 12 bits without sign for current. The ranges 0...5 V und ±5 V are converted with 10 bits plus sign.the output A 62,00 is only available for the counter. If the output is to use as a normal digital output, it has to Further details can be found in volume 2, chapter 5.1 "General
information for the use of analog inputs and outputs". In order to make sure, that unused input channels have a defined 0V level, they may be shorted to AGND. Unused inputs must be configured with "unused".
The relationship between the analog input signals and the converted numbers is illustrated in the following figures. be made sure, that the high-speed counter is not configured to the operating modes 1 or 2 (see also the chapter "High-speed counter").Features of the analog inputs:The 8 analog inputs are not electrically isolated.The resolution of the A/D converter is 12 bits. Analog signals are conducted in shielded cables (seeThe analog inputs can be configured individually in a lot of different operating modes (even as digital inputs). The configuration is performed by setting certain bits in the system constants KW 86,00 to KW 86,07 as follows

DCS800-EP2-0090-05 Module Drive ABB
DCS800-EP2-0125-05 Module Drive ABB

DCS800-EP2-0180-05 Module Drive ABB
DCS800-EP2-0230-05 Module Drive ABB
DCS800-EP2-0315-05 Module Drive ABB
DCS800-EP2-0405-05 Module Drive ABB
DCS800-EP2-0470-05 Module Drive ABB
DCS800-EP2-0610-05 Module Drive ABB
DCS800-PAN Field Kit ABB
DCS800-S01-0020-05 Module Drive ABB
DCS800-S01-0045-05 Module Drive ABB
DCS800-S01-0065-05 Module Drive ABB
DCS800-S01-0090-05 Module Drive ABB
DCS800-S01-0125-05 Module Drive ABB
DCS800-S01-0180-05 Module Drive ABB
DCS800-S01-0230-05 Module Drive ABB
DCS800-S01-0290-06 Module Drive ABB
DCS800-S01-0290-07 Module Drive ABB
DCS800-S01-0315-05 Module Drive ABB
DCS800-S01-0405-05 Module Drive ABB
DCS800-S01-0470-05 Module Drive ABB
DCS800-S01-0900-06 Module Drive ABB
DCS800-S01-0900-07 Module Drive ABB
DCS800-S01-1500-06 Module Drive ABB
DCS800-S01-1500-07 Module Drive ABB
DCS800-S01-2050-05 Module Drive ABB
DCS800-S01-2050-06 Module Drive ABB
DCS800-S02-0025-05 Module Drive ABB
DCS800-S02-0050-05 Module Drive ABB
DCS800-S02-0075-05 Module Drive ABB
DCS800-S02-0100-05 Module Drive ABB
DCS800-S02-0140-05 Module Drive ABB

DCS800-S02-0200-05 Module Drive ABB
DCS800-S02-0260-05 Module Drive ABB
DCS800-S02-0290-06 Module Drive ABB
DCS800-S02-0290-07 Module Drive ABB
DCS800-S02-0350-05 Module Drive ABB
DCS800-S02-0450-05 Module Drive ABB

The use of the product: