ABB Module ICMK14N1 1SBP260052R100 ABB ICMK14N1 MODULE ORIGINAL Reasonable price

Product Description:

Online program modification A quick modification of the user program is possible
without interrupting the operation (see programming system 907 PC 331). Change-over between the operating modes Stand-alone basic unit Bus master basic unit and Slave basic unit The basic unit is set to ”Stand-alone” upon delivery. Changing the application mode is carried out in the following
three steps: Change the system constant KW 0,0 in the PLC, see chapter A7.3 (Appendix), System constants Save the user program in the Flash EPROM or use a battery for back-up Activate new operating mode by:calling up the menu item of ”Enable PLC mode” in the ABB programming and test system or performing a warm start performing a cold start or power OFF/ON. Setting the cycle time
see chapter B1 (Appendix), Processing times Addressing when remote modules are connected
see chapter B2 (Appendix), Addressing Back-up of data areas Back-up of data areas, i.e. saving of data during power OFF/ON, is only feasible with built-in battery. The following data can be backed, completely or partly

Related Product Recommendation:

Product's Character:

Binary flags Word flags Double word flags Step chainsHistorical values In order to back-up certain data, they have to be excludedfrom initialization to 0. Initialization of data areas During program start, that data areas are initialized to 0 partly or completely, that are defined by system constants, see chapter B7(Appendix), System constants. If no battery is effective or if the system constants are in their default values (factory settings), all of the above mentioned data areas are completely set to 0 after
power OFF/ON.Reactions on errors of error class 3 The user can configure whether or not the user program is to be aborted automatically, if an class 3 error occurs, see chapter B7 (Appendix), System constants.

The use of the product: