ABB Module DSTD108P 3BSE018333R1 ABB DSTD108P 3BSE018333R1 DSTD 108P sealed affordable price

Product Description:

The 07 KT 94 basic unit is equipped with a special parallel interface. It is thus possible to network it with another bus system using an additional communication processor module.The additional communication processor has its own housing. Both housings (of the 07 KT 94 and of the communication
processor) are assembled by means of a snap-on connection.The SmartMedia Card serves for storing data up to 2 MB not being lost over an power OFF/ON cycle. It is used in the 07 KT 94 basic unit. It is recommended only to use ABB-proven SmartMedia Cards. Field of application Storing and loading of PLC programs one separate SmartMedia Card is used for each user program.Storing and loading of user data there are 250 data segments with 128 blocks each available (1 block = 32 words). Loading of firmware updates

Related Product Recommendation:

Product's Character:

For the passive mode of COM1, the interface parameters can be changed using the SINIT function block. If the changed values are not plausible, the COM1 interface uses the default values.
The interface is newly initialized each time the operating mode is switched over.
The active mode parameters are set in the active mode, whereas in the passive mode the parameters established by the SINIT block or the default values are set.The serial interface COM2 is only suitable for the passive mode. In addition, it can be operated as a MODBUS interface.The passive mode is used to perform a communication configured with the DRUCK and EMAS blocks between the user program and a device connected to the serial interface. The application-specific initialization of COM2 can be performed
using the SINIT function block.

The use of the product: