ABB Module DDI01ABB DDI01 PC BOARD First class quality and price to serve you

Product Description:

Use of the input signals at the terminals 2 and 3(E 62,00 and E 62,01) for the high-speed counter
The two inputs E 62,00 and E 62,01 can be assigned to the internal high-speed counter by configuration. If the counter is used and therefore configured to one of its possible operating modes, these two inputs are only available for the counter. If the two inputs are to use as normal digital inputs, it has to be made sure, that the high-speed counter is configured to the operating mode "No counter".This operating mode is the default setting (see also the chapter "High-speed counter"). 4.4.5 Connection of the digital outputs
The following figure shows the assignment of the 16 digital outputs.

Related Product Recommendation:

Product's Character:

Features of the digital inputs/outputs:The 8 digital inputs/outputs are arranged in one group.The group as a whole is electrically isolated from the rest of the device.The inputs/outputs can be used individually as input,output or re-readable output. If the terminals are used as digital inputs, the input signal delay can be configured to 7 ms (default) or to 1 ms. The configuration is performed by setting certain
bits in the system constant KW 85,01 as follows: If the terminals are used as digital outputs, the output
signals "1" are individually monitored by the re-readable input. If the output status is wrong, an overall error message is generated for the involved output group.The error is displayed by the red LED Ovl. and by errorflags of the PLC then. The error could have been caused by overload, shortcircuit
or missing supply voltage UP5/ZP5.The technical specifications are the same as with the
other digital inputs and outputs.

The use of the product: