Allen Bradley 1442-PR-0803M0510N 1442PR0803M0510N AB 1442 PR0803M0510N
Product Description:
The Remote I/O communications module allows a SCANport product to look and act like a Remote I/O chassis when connected to a programmable controller. Data contained in the input/output image table is transferred between the programmable controller by the Remote I/O scanner, the same as with any
Remote I/O chassis. You control the location of data transferred by setting the rack address and
starting group. You control the amount of data by setting the DIP switches on SW3. Important: Thecommunications module does not scale the data that is transferred. Consequently, all scaling of the
data must be done in the controller. Refer to the user manual for your SCANport product for details on
device units. Important: The Remote I/O to SCANport conversion is asynchronous. Data sent to the adapter for transfer to the drive must be maintained until the drive has received data.DIP switches on SW3 determine how the data contained in the programmable controller I/O image table is used in the drive. Figure shows an I/O image table.
Contact Information:
Email :sales@mooreplc.com
Q Q: 2851195450
Skype: miyazheng520
Mobile:86-18020776792 ( what's app )
Related Product Recommendation:
1442-PS-0505M0010N | 1442-PS-0809M0005A | 15-131623-00 |
1442-PS-0507M0010A | 1442-PS-0809M0005N | 1734-ACNR |
1442-PS-0507M0010N | 1442-PS-0809M0010A | 1746-BTM |
1442-PS-0509M0010A | 1442-PS-0809M0010N | 1746-C9 |
1442-PS-0509M0010N | 1442-PS-0812E0005A | 1746-FIO4V |
1442-PS-0512E0010A | 1442-PS-0812E0005N | 1746-HS |
1442-PS-0512E0010N | 1442-PS-0812E0010A | 1746-HSCE2 |
1442-PS-0512M0010A | 1442-PS-0812E0010N | 1746-HSRV |
1442-PS-0512M0010N | 1442-PS-0812M0005A | 1746-HT |
1442-PS-0515M0010A | 1442-PS-0812M0005N | 1746-IA8 |
1442-PS-0515M0010N | 1442-PS-0812M0010A | 1746-IC16 |
1442-PS-0516E0010A | 1442-PS-0812M0010N | 1746-IH16 |
1442-PS-0516E0010N | 1442-PS-0815M0005A | 1746-IO12 |
1442-PS-0520E0010A | 1442-PS-0815M0005N | 1746-IO8 |
1442-PS-0520E0010N | 1442-PS-0815M0010A | 1746-ITB16 |
1442-PS-0530E0010A | 1442-PS-0815M0010N | 1746-ITV16 |
1442-PS-0530E0010N | 1442-PS-0816E0005A | 1746-IV16 |
1442-PS-0540E0010A | 1442-PS-0816E0005N | 1746-IV32 |
1442-PS-0540E0010N | 1442-PS-0816E0010A | 1746-N2 |
1442-PS-0550E0010A | 1442-PS-0816E0010N | 1746-NI04I |
1442-PS-0550E0010N | 1442-PS-0820E0005A | 1746-NIO4V |
1442-PS-0560E0010A | 1442-PS-0820E0005N | 1746-NO4I |
1442-PS-0560E0010N | 1442-PS-0820E0010A | 1746-NO4V |
1442-PS-0803M0005A | 1442-PS-0820E0010N | 1746-NR4 |
1442-PS-0803M0005N | 1442-PS-0830E0005A | 1746-NT4 |
1442-PS-0803M0010A | 1442-PS-0830E0005N | 1746-OA16 |
Product's Character:
Bulletin 1305 drive parameter data can be programmed and displayed using PLC’s, SLC’s or other logic controllers using an optional Bulletin 1203 Communication Module. The amount of information that can be transferred between the drive and controller is determined by the DIP switch settings on
theCommunication Module. Table B.1 illustrates the dip switch settings for Bulletin 1203-GD1 (Remote I/O) communication modules. Dip switch settings for other communication modules will be similar. Refer
to the appropriate communication module user manual for details.Important: 1305 drives with firmware
revisions FRN1.01 and FRN1.02 are not compatible with Bulletin 1203 Communication Modules. If connected, an error message will be indicated. The red fault status and amber SCANport status LED’s on the front of the module will flash simultaneously.
1747-L532/C SLC 5/03 SLC 5/03 Control Processor AB
1747-L532/D SLC 5/03 SLC 5/03 Control Processor AB
1747-L532/E SLC 5/03 SLC 5/03 Control Processor AB
1747-L541/B SLC 5/04 SLC 5/04 Processor - Series B AB
1747-L541/C SLC 5/04 SLC 5/04 Processor - Series C AB
1747-L542/A SLC 5/04 1747-L542 Processor - Series A AB
1747-L542/B SLC 5/04 1747-L542 Processor - Series B AB
1747-L542/C SLC 5/04 1747-L542 Processor - Series C AB
1747-L543/B SLC 5/04 Processor - Series B AB
1747-L543/C SLC 5/04 Processor - Series C AB
1747-L551/A SLC 5/05 SLC 5/05 Controller AB
1747-L551/B SLC 5/05 SLC 5/05 Controller AB
1747-L551/C SLC 5/05 SLC 5/05 Controller AB
1747-L552/A SLC 5/05 1747-L552 Processor - Series A AB
1747-L552/B SLC 5/05 1747-L552 Processor - Series B AB
1747-L552/C SLC 5/05 1747-L552 Processor - Series C AB
1747-L553/A SLC 5/05 Controller AB
1747-L553/B SLC 5/05 Controller AB
1747-L553/C SLC 5/05 Controller AB
1747-M1 1 K EEPROM Memory Module AB
1747-M11 Flash Memory Module - 32K AB
1747-M12 Flash Memory Module - 64K AB
1747-M13 64 K Flash EPROM Memory Module AB
1747-M15 Adapter Socket AB
1747-M2 4 K EEPROM Memory Module AB
1747-M5 Adapter Socket AB
PHOENIX CONTACT FLKM-14/PA/BUS/S100 9182136
NSK SERVO DRIVE ESA-LYA3T13-21
MITSUBISHI MELSEC PLC A1S61PN A2USCPU A1SX42 A1SY42
KUHNKE PROFI I/O 690E, 8 DI, 4 DI/DO, 4 DO, 2-WIRE, SCREW-TYPE TERMINAL 690.620.
SIEMENS SIMATIC S5-100U 6ES5 931-8MD11
SIEMENS SIMATIC S5 INTERFACE MODULE 6ES5 316-8MA12
SIEMENS SIMATIC S5 SERIAL INTERFACE 6ES5 521-8MA22
SIEMENS SIMATIC S5 6ES5 422-8MA11 DIGITAL INPUT MODULE
PANASONIC AC SERVO DRIVER MSDA3A3A1A
MERIDIAN LABORATORY ROTARY COUPLING MX-2 MX-2/AIT
SIEMENS SIMATIC S5 SERIAL INTERFACE 6ES5 521-8MA21
SIEMENS SIMATIC S5 6ES5 464-8ME11 ANALOG INPUT
SIEMENS SIMATIC S5 ANALOG INPUT 6ES5 464-8MA21
SIEMENS SIMATIC S5 6ES5 464-8MC11 ANALOG INPUT
AGL MAGNETRON POWER SUPPLY D13550 WORKING
VICOR MEGAPAC MP6-76600 DC POWER SUPPLY
ASTeX 80-P01-HP EPS Power Supply ETO Module
MKS 260 PS-1 POWER SUPPLY
Kenwood PSR20-18MY3 Regulated Power Supply
The use of the product:
1.auto ancillary.
2.textile printing and dyeing,
3.machinery,
1..2000+ suppliers with us, we could help you to get any components which is difficult to get.
2.the elevator industry,
3.parking, automobile,
Our advantages:
1.open architecture to take advantage of traditional or renewable sources of energy!
2.We keep more than 10 thousands Transistors in warehouse, it could cut lead time of most item
3.Customer service in 1-4 hours. If there's any question, please contact with our sales.
Frequently Asked Questions:
1. Q: Can you provide discount ?
A: Yes, we are glad to offer you dicount if you order more than 1 piece .
2.Q: Are the P/N latest?
A: Yes. All P/N are latest and date codes are in 2016 or 2017.
3.Q: What is the capacity of your warehouse?
A: We have 1-2Mil USD safe stocks and 3 warehouses, which located Xiamen, Shenzhen & Hongkong.
Send your Inquiry details in the Below, Click "Send" Now!