5501-466 5501466 Woodward Rev A MICRONET SIMPLEX POWER SUPPLY

⇒ Click here for good price 5501-466

Product Details

To allow best possible cooling, the proper mounting position has to be unconditionally observed taking into account that input terminals (L1/L2/L3/PE or L1/N/PE) have to be placed on top and the output terminals (±) at the bottom. There must be a head space of at least 100 mm above and below and of at least 30 mm at both sides of the BL18 device.

The inlet air temperature must not exceed the admissible ambient temperature specified in the technical data. Connection of the three-phase input voltage is to be made according to the scheme that is printed on the housing of the unit. For this purpose it is not necessary to observe the indicated phase sequence. The feed lines (= primary sides?) of the unit should be protected by either a three-pole Lminiature circuit breaker or via a three-pole motor protecting switch (adjusted to 2.5 A). It is not allowed to operate the unit if one of the phases had failed. The protected earth (PE) of the BL18 and protected earth of the switchboard have to be connected. Installation of the switchboard has to be carried out in compliance with the regulations VDE 0100 and VDE 0160.

About Moore

ASKPLC.COM SUPPLY A WIDE RANGE OF MANUFACTURERS

If you are not sure what brand of product you need or are looking for an alternative please contact us with your requirements and we will be able to offer products to fit your specifications. At askplc.com we have a dedicated specialised team to help you with your enquiries.

askplc supply a wide range of manufacturers including ABB DCS/PLC
AB(AB)Rockwell; Bently Nevada 3500; Klockner Moeller; Emerson; DeltaV; ICS Rockwell trusted; Emerson; OVATION
honeywell DCS; HIMA DCS; TRICONEX/TRICON/FOXBORO DCS; Yokogawa DCS; WOODWARD; GE MK MODULE
ProSoft for Allen Bradley; Emerson EPRO/A6312/A6110/A6120/A6210/A6220 and many more.

More Products

Contact Us

Email: miya@mvme.cn

QQ: 2851195450

Tel: 86-18020776792

Skype: miyazheng520