Product Specification
Brand/Manufacturer | GE/USA |
Part Number | DS200SSBAG1BAA |
Alternate Part Number | DS200SSBAG1BAA |
Description | DC300 Drive Snubber Board |
Dimennsions | 3.5*14*12cm |
Weight | 0.26kg |
Product Details
The GE DC300 Drive Snubber Board DS200SSBAG1BAA features one
2-pin connector, 3 capacitors, and four posts for attaching cables. The
capacitors are identified as MOV1, MOV2, and MOV3. The identifiers
are printed on the board next to the capacitors. Because there are multiple
cables connected to the board that have to be disconnected and then
reconnected to the replacement board, there are several guidelines to follow
to avoid errors during the replacement process that might cause the servicer
to attach the cables to the wrong terminals.
Before you remove the defective board from the drive, examine the cables
attached to the terminals and note the IDs assigned to the terminals. Write
on a tag or sticker the ID of the connector to which each cable is attached
and attach it to the cable. There is also a 2-pin connector on the board.
However, since there is only one 2-pin connector you can disconnect it
without attaching a tag or sticker to it.
GE News
GE-led Consortium to Build Two High-Efficiency, Lower Emission HA Combined Cycle
Power Units at Dolna Odra Power Plant in Poland:
PGE’s Dolna Odra Plant will be equipped with two GE 9HA.01 gas turbines, two
steam turbines, two generators and two heat recovery steam generators to deliver
world-class efficiency and flexibility for the combined cycle power plant.
More Products
GE | DS200LDCCH1A | GE | 531X133PRUAMG1 |
GE | DS200TBQBG1ACB | GE | 531X139APMASM7 |
GE | IS2020ISUCG3A | GE | 531X124MSDAJG2 |
GE | IC660CBB902K | GE | 531X300CCHAGM5 |
GE | DS200TCDAH1BHD | GE | IC600LX624L |
GE | 531X121PCRALG1 | GE | IC660CBB902K |
GE | IC600BF929K | GE | IC600BF929K |
GE | IC600FP832K | GE | IC660FP8900K |
Contact Us