Specifications
Brand Name :
Julun
Place of Origin :
China
MOQ :
100 / Negotiable
Price :
Negotiable
Payment Terms :
L/C, D/P, T/T,
Supply Ability :
10000/Piece/Weekly
Delivery Time :
7~10 Working days
Packaging Details :
Standard carton
Certification :
CE/UL/VDE/KC/ROHS
Model Number :
MF
Tolerance :
±5%,±1%
Operating Temperature :
-30℃~250℃
Temperature Coefficient :
±350PPM/℃
Type :
Fixed Resistor
Package Type :
Throught Hole
Description

Wire wound fuse resistance FKNP series current protector Thermal Fuse Resistor

FEATURES


Function as a resistor in normal condition.
Quick fusing protects circuit from excessive overload.
Low resistance value.
Flame retardant coating.
RoHS compliant / lead-free available.

MAIN SPECIFICATION



Type

WORKING MAX OVERLOAD RatedPowerat70℃ RESISTANCE VALUE RANGE
FKNP 1/2W 8V 20V 1/2W 0.1Ω-60Ω
FKNP 1W / 1WS 15V 38V 1W 0.1Ω-100Ω
FKNP 2W / 2WS 20V 50V 2W 0.1Ω-100Ω
FKNP 3W / 3WS 25V 60V 3W 0.1Ω-150Ω
FKNP 5WS 30V 75V 5W 0.1Ω-150Ω

Power rating is defined as maximum power rating continuously applied under ambient temperature at 70℃.when the ambient temperature exceeds 70℃.

Fusing characteristics


Shall comply with the following provisions under the condition of overload fuse time at rated current rate specified (0.25W R<1 rated current ratio for 30 times. The R more than 1 ohm rated current ratio for 36 times. The fuse time less than 60 seconds. 0.5-3W R<1 rated current ratio for 30 times. The R more than 1 ohm rated current ratio for 36 times. The fuse time less than 60 seconds. 1WS-3WS R<1 rated current ratio for 30 times. The R more than 1 ohm rated current ratio for 36 times. The fuse time less than 60 seconds. Note: the fusing characteristics can be made according to the requirements of the customer and the product which is required to be struck by lightning does not examine the time of fusing or according to the requirements of the customer.

PERFORMANCE

ITEM


PERFORMANCE AND QUALIITY ACCEPTANCE


TEST METHOD


Resistance to temperature
coefficient



1. Rx < 100KΩ
PPM/℃ < +350~500 PPM/℃

2. 100KΩ> Rx <1MΩ
PPM/℃ < 0 ~ -700PPM/℃

Rx >1MΩ
PPM/℃ < 0 ~ -1500PPM/℃


R – RO 106
PPM/℃ = *
RO T- T0

R = Measured resistance(Ω)at T
T ℃
Ro = Measured resistance (Ω)at To
To ℃
T = Measured test temperature(℃)
To = Measured base temperature( ℃)


Short time overload


≤ ±(2%R + 0.05ohm)
Shall be no mechanical breakage



AC or DC voltage 2.5times the rated
Voltage for 5 seconds .


Voltage endurance



No breakdown or flashover



Lay the resistor on the 90° angle metal “V” peak is 1.42 times as much as insulate voltage .


Terminal strength


Shall be no mechanical breakage



Pull test apply 3.5KG force to the lead in the direction of lead axis for 30±5 seconds.


Heat resistively
against soldering




≤ ± (2%R + 0.05ohm)
Shall be no mechanical breakage



Dip the lead in to a solder bath having a temperature of 350℃ ± 10℃ up to 3±0.05mm from the body of the resistor and hold it for 3.5±0.5seconds leave the resistor ,at room temperature 1 hours after ,then Measure.


Load life test



≤ ±(5%R + 0.05ohm)
Shall be no mechanical breakage



In the constant temperature chamber 70℃ ,apply rated voltage for 1 hour and shut voltage for 0.5 hour and repeat this cycle for 1000 hours,


Solder ability



≥95%



Dip the lead in to a solder bath having a temperature of 260℃±5℃.
Time:5± 0.5seconds.


Humidity load test




≤± (5% R+ 0.1ohm)
Shall be no mechanical breakage


In temperature chamber 40℃±2℃,relative humidity 90 – 95%,Apply rated voltage 1.5hour and shut voltage 0.5 hour repeat this cycle for 1000 hours, leave in room temperature for 1 hour after test,


Vibration






Shall be no mechanical breakage



set a resistor at the vibration table and vibrate 10HZ—55HZ 10HZ/s. with 1.5mm amplitude in 1 min. when the change of frequency shall be completed uniformly. the vibration shall apply to 3 directions,vertical and horizontal to the axis of resistor each for 3h.


Endurance at upper-limit temperature



≤±(5%R+0.1Ω)


At 125 ℃ temperature, duration of 1000h

Dimension

TYPE L D H d PULLING(Kg)
1/6W 1/8W 1/4WS 3.2±0.3 1.8±0.3 28±2.0 0.40±0.05 2.5Kg-30S
1/4W / 1/2WS 6.0±0.5 2.3±0.3s 27±2.0 0.43±0.05 2.5Kg-30S
1/2W / 1WS 9.0±1.0 3.5±0.5 26±2.0 0.50±0.05 2.5Kg-30S
1W / 2WS 11.0±1.0 4.5±0.5 30±2.0 0.60±0.05 3Kg-30S
2W / 3WS 15.0±1.0 5.0±0.5 32±2.0 0.65±0.05 5Kg-30S
3W /5WS 17.0±1.0 6.0±0.5 31.5±2.0 0.70±0.05 5Kg-30S
5W 24.0±1.0 8.0±1.0 28±2.0 0.75±0.05 5Kg-30S


FKNP Series Thermal Fuse Resistor  Non Inductive Wirewound Resistors Low Resistance Value

FAQ


Q: Can I have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q: Can we have our logo or company name to be printed on your products or the package?
A: Yes, for container order, we have OEM packing service, you need to inform us your logo or

company information in details. For bulk cargo, we will use neutral packing.
Q: What adventages do you have?
A: Fast delivery and good service.
Stable quality with competitive price.
Strict management system.


Please tell me:
What product specifications do you need? when you ask for a quotation.I will give you the most

competitive price per as your requirements. And we have many types for you to choose.


P.S.:If you can't find any products to meet your requirements. welcome to send us the details

drawings so that we can provide us our professional & best service to you.

Send your message to this supplier
Send Now

FKNP Series Thermal Fuse Resistor Non Inductive Wirewound Resistors Low Resistance Value

Ask Latest Price
Brand Name :
Julun
Place of Origin :
China
MOQ :
100 / Negotiable
Price :
Negotiable
Payment Terms :
L/C, D/P, T/T,
Supply Ability :
10000/Piece/Weekly
Contact Supplier
FKNP Series Thermal Fuse Resistor  Non Inductive Wirewound Resistors Low Resistance Value

JULUN (H.K)CO.,LTD (DONGGUAN JULUN ELECTRONICS CO.,LTD)

Verified Supplier
8 Years
guangdong, dongguan
Since 2009
Business Type :
Manufacturer, Distributor/Wholesaler
Total Annual :
5900000-7000000
Certification Level :
Verified Supplier
Contact Supplier
Submit Requirement