IEC Test Equipment Tumbling For Barrel Testing Machine With Rotate Speed Of 5rpm

Standard:

IEC 60884-1 2013 ‘Plugs and socket-outlets for household and similar purposes -- Part 1: General requirements’ clause 24.2.

IEC 60598-1‘Luminaires - Part 1: General requirements and tests’ clause 4.13.6

IEC 60998-1‘Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements’ .

IEC 60068-2-31‘Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens’.

IEC 60312-1 ‘Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance’.

Standard description of IEC60598-1:

Plug-ballast/transformers and mains socket-outlet-mounted luminaires shall have adequate mechanical strength.

Compliance is checked by the following test, which is made in a tumbling barrel as shown in Figure 25.

The barrel is turned at a rate of five revolutions per minute, ten falls per minute thus taking place.

The sample falls from a height of 50 cm onto a steel plate 3 mm thick, the number of falls being:

– 50 if the mass of the sample does not exceed 250 g;

– 25 if the mass of the sample exceeds 250 g.

After the test, the sample shall show no damage within the sense of this standard, but it need not be operative and any damage to the glass bulb shall be ignored. Provided that the protection against electric shock is not affected, small pieces which may have broken off the sample are ignored.

Application:

This device is suitable for test the drop resistance of plugs and socket-outlets, surface type mounting boxes, screw glands, gland covers, switch and other electrical accessories.IEC Test Equipment

Test sample:

plugs and socket-outlets, surface type mounting boxes, screw glands, gland covers, switch and other electrical accessories.

Feature:

This tester can preset test times, automatic stop when set test times completed. IEC Test Equipment

Parameters: