Auto Parts Test Equipment Walk-in Environmental Test Chamber For Vehicle Component
Standard:
IEC 60068-2-1 Environmental testing for electric and electronic products – Part 2-1: Tests methods – Test A: Cold;
IEC 60068-2-2 Environmental testing for electric and electronic products – Part 2-2: Tests methods – Test B: Dry heat;
IEC 60068-2-78 Environmental testing – Part 2-78: Tests methods – Test Cab: Damp heat, steady state;
IEC 60068-2-30 Environmental testing for electric and electronic products – Part 2-30: Tests methods – Test Db: Damp heat, cycle (12h+12h cycle)
Application:
It is applied in heat-resistance and cold-resistance tests of products related to national defense industry, aerospace industry, automation components, auto parts, electronic and electrical devices, as well as plastic cement, chemical and pharmaceutical industries. It is suitable for testing those tested parts and products of a large amount and huge volume. HeJin provides the customers with all-around environmental reliability test proposal. Auto Parts Test Equipment
Parameter:
Inside volume | 8m3(can be customize) Auto Parts Test Equipment |
Temperature range | Optional range: low temperature -20 (-20, -40, -60°C) ~ high temperature+85 ( +85, +120, +150°C) |
Humidity range | 20%~98% R.H. (temperature operating range +20°C~+85°C) |
Temperature fluctuation | ±0.5 |
Temperature deviation | ±2°C |
Humidity deviation | -3~+2%R.H.(over 75%R.H.), +5%R.H.(below 75%R.H.) |
Heating / cooling rate | Optional range:0.5-15°C/min, load can be specified |
Remark | Above indicators are measured in no load at ambient temperature of 20±2°C, range measured at heating/cooling rate is +85 /-55°C |
Internal dimension | 2000*2000*2000 |
External dimension | 3000*2240*2320 (D*W*H) |
Inspection window | 450*500 provided with heating device to prevent condensation and frosting |
Test hole | Two, diameter 100, on the right of the box |
Illumination | Equipped with headlamp |
Colling mode | Water cooling (water temperature 7~28°C, water pressure 0.2~0.4Mpa) |
Power supply | 380V±10%/50Hz±1, three phase five wire system(3P+N+G) |