MachineU > China Products > Home & Garden > Garden Supplies > Household Thermometers
Laboratory 30%～98%RH Auto Parts Test Equipment Walk In Constant Temperature And Humidity
Laboratory 30%～98%RH Auto Parts Test Equipment Walk In Constant Temperature And Humidity
Specifications
Brand Name :
HeJin
Model Number :
AM0031
Certification :
Calibration Certificate(cost additional)
Place of Origin :
China
MOQ :
1 set
Price :
Negotiable
Payment Terms :
L/C, T/T
Supply Ability :
10 set /month
Delivery Time :
40 days
Packaging Details :
Plywood
Humidity range :
30%～98%RH
Humidity deviation :
±5.0％RH
Heating rate :
2.5 ° C/min (non-linear, no-load)
Supply source :
380V±10%V；50Hz；
Temperature deviation :
<±2℃
temperature uniformity :
±2℃
Description

Walk-In Constant Temperature And Constant Humidity / High And Low Temperature Laboratory 30%～98%RH Auto Parts Test Equipment

Products Introduction:

It is suitable for high and low temperature and humid heat test of electrician, electronics, machinery and large parts, semi-finished products and finished products.Test the quality and reliability of the products and parts under the simulated temperature and humidity changes.

Meet the standards:

Gb10589-89 Low temperature test box technical conditions;Auto Parts Test Equipment

Gb10592-89 High and low temperature test box technical conditions;

Gb10586-89 Humidity and heat test chamber technical conditions;

Gb11158-89 High temperature test box technical conditions;Auto Parts Test Equipment

Gb2423.1-89 Basic test specification for electrical and electronic products Test A: Low temperature test method;

Gb2423.2-89 Basic test specification for electrical and electronic products Test B: High temperature test method;

Gb2423.3-91 Basic test procedures for electrical and electronic products test Ca: Constant damp heat test method;

Gb2423.4-89 Basic test specification for electrical and electronic products Test Db: Alternating damp heat test method;

Gb2423.22-87 Basic test specification for electrical and electronic products Test N: Temperature change test method;

Gb2424.1-89 Basic environmental testing procedures for electrical and electronic products Test Db: Guidelines for high and low temperature tests;

GB/T5170.2-1996 Verification method of basic parameters of environmental testing equipment for electrical and electronic products.Temperature test equipment.Auto Parts Test Equipment

GB/T5170.5-1996 Verification method of basic parameters of environmental testing equipment for electrical and electronic products.Humid heat test equipment.

Parameters:

Standard volume (m3) 8 12 20 50
Internal chamber size (W * H * D) m 2×2×2 3×2×2 4×4×5 5×2×5
Temperature range Maximum test temperature: 80℃, 120℃; minimum test temperature: -60℃, -40℃, -20℃, 0℃
Humidity range 30%～98%RH
Temperature deviation <±2℃
Temperature uniformity ±2℃
Temperature fluctuation ±0.5℃
Humidity deviation ±5.0％RH
Heating rate 2.5 ° C/min (non-linear, no-load)
Cooling rate The average value was 1.0℃ / min.
Inner box material SUS304 stainless steel plate
Outer box material A3 Cold-rolled steel sheet electrostatic double-sided injection molding / SUS304 stainless steel.
Heat insulation material Hard matter polyurethane foaming.
Refrigeration method Water cooled (Adopt Bitzer fully closed compressor or Bock semi-sealing compressor from Germany).
Cryogen R404a,R23
Temperature and humidity sensor Class A PT100 Platinum resistance.
Heater Nickel-chromium alloy electric heating type heater.
Humidifier Apply the external humidification mode.
Supply source 380V±10%V；50Hz； Auto Parts Test Equipment
Protection system Power supply phase deficiency and phase sequence error protection, water shortage automatic alarm protection, leakage protection, heater overtemperature protection, heater short-circuit and other overcurrent protection.
Installation environment Temperature: 0℃ ~35℃, relative humidity: 85%, air pressure: 86kPA~106kPa
The installation site shall be flat, well ventilated and no strong vibration around the equipment.
There is no strong electromagnetic field influence around the equipment, no flammable, explosive, corrosive substances and dust around the equipment.
Proper use and maintenance space remains around the equipment.

Send your message to this supplier
Send Now

Laboratory 30%～98%RH Auto Parts Test Equipment Walk In Constant Temperature And Humidity

Ask Latest Price
Product Detail
Brand Name :
HeJin
Model Number :
AM0031
Certification :
Calibration Certificate(cost additional)
Place of Origin :
China
MOQ :
1 set
Price :
Negotiable
Contact Supplier
Laboratory 30%～98%RH Auto Parts Test Equipment Walk In Constant Temperature And Humidity

HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

Verified Supplier
6 Years
guangdong, guangzhou
Since 2012
Business Type :
Manufacturer
Main Products :
Auto Parts Test Equipment, Leak Testing Equipment, IP Test Equipment
Total Annual :
3000000-5000000
Employee Number :
50~100
Certification Level :
Verified Supplier
Discover similar products
View More
Watch related videos

Find Similar Products By Category:

Supplier Homepage Products Auto Parts Test Equipment
MachineU China Products Home & Garden Garden Supplies Household Thermometers
Contact Supplier
Submit Requirement