Digital Five Gear Switch Sliding Door Operator With Bea Radar
Full-featured , easy to use automatic sliding door technology - reflect the perfect combination of the safety
and accuracy .
STD420 control system is very intelligent : it can be auto-adjust drive force by leaf weight to make leaf run stably . speedy and smoothly ,specially fit for heavy transit entrance such as bank , hospital ,opera house and so on .
It is special double track can avoid leaf degress . The battery( within standard part ) can open the door even on power failure .
The operator box can tune mode and preferences . STD420 can expand to interface with many kind of sensor and control device .
Function and Characteristic
1. Install easy and fast .
2. Through operator box ,operating mode (auto,half-open , permanent open ,exit,night ) and parameter ( speed , delay close , close force , open width...) can be tuned .
3. Connectivity : beam sensor , key -switch , remote control , coded access controller , can interface to STD420 and STD420 system can drive alarm and interface to another control system .
Technical Parameters
Single leaf opening width | 700mm to 2000mm |
Double leaf opeing width | 900mm to 3000mm |
Max. weight (single leaf) | 120KG |
Max. weight(double leaf) | 2x120KG |
Body size(height x depth) | 100mm x 180mm |
Max. opening speed | 0.7m/s |
Max closing speed | 0.4m/s |
Closing delay time | 0 - 60 second |
Input | 220V AC /50Hz or 24 VDC |
Max. power consume | 100W |
Standard accessories a set system of STD420 Automatic sliding door drive
1. Center computer Control 1 Unit
2. Power Module 140W transformer( include battery) 1 Unit
3. SLM420 Motor & Gear & Encoder & Wheels 1 Unit
4. STD420 Aluminium Rail 4.2 meter
5. Synchronous Belts(wired) 5 meter
6. Deflect Pulley 1 Unit
7. T-type Aluminium Roller Carrige 4 pieces
8. 12mm Screw 4 pieces
9. Lift 4 pieces
10. Radar sensor 2 pieces
11. Stop Block 2 pieces
12. Earth Connect Parts 1 piece
13. Cable 1 piece
Picture for automatic sliding door drive as follow :