Air Conditionaing Shell Automatic Paint Spraying Equipment Japan THK Guide Rail

Easy to operate Automatic Paint Spraying Equipment for Air conditionaing shell

The five axis reciprocating spraying machine with air spraying system will help you get a good coating film and reduce the manual cost. The details of automatic five axis spraying machine are as follows.

1. This machine is widely used in many industry. Generally speaking , standard type of this machine has two product tray. If you want to buy a machine with four product tray, then you will get double yield under the premise of high quality coating.

2. It is easy to debug the machine. You can finish debugging for usual product in 15 minutes. The program writing of machine is regard one plane of product as a program segment. When you finish setting the start point , end point and the spraying speed, then you have finished a program segment. After finish every program of plane, then the complete program is finished.

3. This machine has continuous spraying method and step spraying method.

4.The atomization and sector, painting output of spray gun can be controlled by computer. When the machine begin to spray , the spray gun can blow, in order to blow dust.

5. It is easy to use this machine ,and you can store 160 programs of product. The machine operated by fully digital computer.

The detailed configuration of the robot has written in the form, you can see our automatic spraying painting machine's configuration is high ,so the failure rate of machine is very low. If i were you ,i would buy a high quality machine if i want to buy a machine from abroad. Then, why don't you choose us?

Product details

Exhibition

FAQ:

Question 1: I don't know anything about the machine. Will you provide the technical support?

Answer: Sure. Every machine will be test before delivery. We will make sure there is no problem for the machine.
You may send 2-3 smart workers to come to our factory to learn how to operate the machine.
When the machine arrives your factory, we will send the experts to your factory to help for installation. Operation training will be provide. It may take about 20-30 days. Maintenance tips will be given.
Also, we provide consulting service for creating the proper facilities for running the machine.

Question 2: What is price of the machine?

Answer: The machine is custom made. If you have any drawing or any information on specification of the machine, please send to us for quote.
If you are totally new in this area, please tell us the max. dimension of your products, its application, and your desired daily capacity.
We will provide our professional suggestions and work out an appropriate design for your project.

Question 3: What kind of pre-treatment I need to do before loading to reciprocator?

Answer: the products have to be CLEAN AND DRY.

Question 4: Is it safe to operate the machine?

Answer: The machine provides security setup and all mechanical units can be controlled from touch screen. So the machine itself is very safe to use.