Digital Display Tension Meter Controller For Web Tension Measuring Alternative LM-10PD

Features:

Key intelligently set zero, scaling, operation simple convenient.

1. Can select left /right total tension display.

2. Adapt SMT ,small size,light weight.

3. Tension controller with STS ans STSA for option.

4. Hardware and software to restrain power frequency interference, output steady and reliable.

5. Bedded installation,easy and convenient .

Attention:STM-050 tension meter only display tension,no control signal output,other functions same as STM-10PD.

Work with loadcell as below:

Hollow coupling sensor

Electrical Wiring

L+:positive terminal of tension detector input signal on left side

L-:negative terminal of tension detector input signal on left side

5V+:positive terminal of tension detector power supply on both sides

PE:detector shielding cable on both sides

GND:power supply negative terminal on both sides

R+: positive terminal of tension detector input signal on right side

R-:negative terminal of tension detector input signal on right side

STS sensor wiring

Iout: 0~20mA output

Vout: 0~10V output

5V+: 5V output

GND: output negative terminal of voltage and current

Zero calibration

Machine power off, there is no film or film is loose.

Enter C01 parameter screen,press button can change C01 from 0 to 1,when it change from 1 to 0 automatic,zero calibration is completed.

After zero calibration,if up LED displays error and alarm indicator lightens,refer to section7, 8 for the problem.After trouble is remove,return C01 to zero calibration.

Can replace Mitsubishi model

LM-10PD tension meter used to get significantly in the detector from the LX-TD tension and strain ceremony pass salty , wire, various film unwinding, rewinding and intermediate shaft so the tension signal, while the instrument the apparatus of the amplified signal output to the recording apparatus, the peripheral tension meter, programmable controller, etc.

Features

1. Compared with the company's previous models, greatly realized Product miniaturization, lightweight
2. Automatic zero, span adjustment: a key type tension detection zero, span adjustment
3. Parameters set number officer
4. Tension lower limit on detection function (2 point detection)
5. Tension peak memory function
6. Supporting the use of the Strain ceremony sensor
7. The output filter can adjust alone
8. Can manually display, output bias and span adjustment

FAQ

1. Q: Are you a factory or trading company?
A: We are a factory, professional manufacturer.

2. Q: Where is your factory located? How can I visit there?
A: Our factory is located in Wuhan City, Hubei Province, China.

You can fly to Wuhan airport directly.
All our clients are warmly welcome to visit us!

3. Q: Which industries are widely used in of your machine?
A: Those are mainly used in forming of three industries of adhesives products, electronics, and new energy power battery.
Examples of protective film, cutting backlight products, adhesive products, mobile phone accessories,
insulation film, garment accessories, automotive adhesives tapes etc.

4. Q: Could you send samples?
A: We are honored to receive your samples for Slitting Test.

5. Q: How does your factory do regarding quality control?
A: Quality is our culture.
We always attach great importance to quality controlling from the very beginning to the very end.
Our factory has gained ISO9001 authentication.

6. Q: How can I find the most appropriated machine for my material?
You can tell us the parameters of your material, then we can recommend you the most suitable machine for you.