Magnetic Eddy Current Brake 400NM Torque With 2600 W Slip Power Powder Brake Hollow Flange

Hollow Coupling Eddy Current Brake 400NM Slip Power 2600W Alternative Mitsubishi

Features:

1. Rated torque: 6 to 400 (N · m)
2. Natural cooling / compulsory extended shaft type
a. 15 r / min from available
b. through the compressed air is blown into the voids in the heat to improve the thermal capacity.

About life of magnetic powder brake

The use of magnetic powder clutch/brake life lies in the life of the magnetic powder.In general, magnetic powder in the condition of not overloaded, its service life is 4500~7500 hours;But in some condition it can prolong service life many times, such as: reduce the magnetic powder clutch/brake torque, relative sliding speed and slip power to the rating of 50% 70%.That is to say, when the design, allowance enlarge some as much as possible.

About the torque of magnetic powder brake
Magnetic powder clutch/brake factory after use, the magnetic powder in the early stages of using break-in happens, torque will be slightly down, can be adjusted by electric current to compensate.

Remarks:

(1): The formal installation method (high-speed rotating side as the input side) to use magnetic powder clutch.
(2): Please note that the moisture. Magnetic particle moisture, the performance will become unstable, so be especially careful not to let the oil or moisture intrusion internal.
(3): Please note that the surface temperature.

Remarks:
(1): The formal installation method (high-speed rotating side as the input side) to use magnetic powder clutch.
(2): Please note that the moisture. Magnetic particle moisture, the performance will become unstable, so be especially careful not to let the oil or moisture intrusion internal.
(3): Please note that the surface temperature.

FAQ

How to get your suitable machine parts
Enquiry: Contact us by email, phone call, fax, Instant Messenger (Skype) and let us know your enquiry.

Discussion:Let us know the model number,like magnetic powder clutch, specify the items you desire, confirm specification; OEM/ODM consultation.

Place order as per contract or discussion.

Perform invoice( sales contract ) In duplicate confirmed and kept by both sides.

Payment settled.

Order completed under our arrangement.

Goods shipped as per contracted term.

Goods arrive at local port or warehouse, depending on contracted term.

Support & re-ordering.

Any question about Printing Machinery Parts ,contact with us please,sincere service for you and welcome to Micro Control!