1.5mm thickness cabinet 304 stainless steel full height sliding gate access control turnstiles
Introduction of full height sliding gate:
1. Directional Optical Signals----Green Arrow or Red Cross signage
2. Only one person can pass with one card.
3. Installed in indoor or outdoor with shed.
Applications of full height sliding gate:
Full height sliding gate is suitable for indoor or outdoor with tent. They are optimized solution for :
- Wharf, Metro station, tourist attraction, entrance and exit management channel of factory
- Time attendance, access control, consumption management for enterprise or business buildings
- Recount channel management of exhibition, swimming pool, etc
- Special channel management system
Features of full height sliding gate:
- Brake lever steering : one-way, two-way (optional)
- Control mode: manual/ automatic (optional)
- Can mount a variety of control devices: metal security gate/ IC card/ ID card/ card/ barcode card, etc.
- Working environment: indoor(outdoor use shall stand awning)
- Ultra quiet design: Mechanical design using third-generation silent, smooth operation no noise impact;
- Super bright passage indicator: directional design of ultra- bright LED lights to indicate a more eye-catching ;
- Automatic access function: the reader automatically run after the brake lever to unlock certain angle, automatically bring people through the gates ;
- Multiple modes of function: by setting the switch can be set to the gates normally open , normally closed two modes of operation ;
- Access memory function: After several pedestrians card, access gates opportunity to remember the number, until the entire passage of pedestrians closing;
- Power off the pole, the power from the bar features: gates automatically after power brake lever to facilitate evacuation fall to meet fire safety requirements ; ( automatic type )
- Anti-collision function: no credit card pedestrian push the brake lever , lock gates
- Remote control: RS485 card can be accessed by computer or TCP to RS485 remote control gates
- Automatic reset function: by credit card is not specified , within the time gates back in situ cancel access .
Specifications of full height sliding gate:
Item | Specification |
Power supply | AC220±10%V 50Hz/AC110±10% 60Hz |
Access device input voltage | Dry contact or 12V electrical level signal or > 100ms 12V impulse signal, driving current > 10mA |
Motor voltage | DC 24V (brush motor) |
Max flow rate | 25 to 30 person per minute |
Flap opening / closing time | 1s |
Reset time when power on | 3s |
Working temperature | -20°C~60°C |
Case of full height sliding gate:
