Double direction airport half height security control high speed swing barrier for handicap person

Specifications of Pedestrian Swing Gate:

Operation of Pedestrian Swing Barrier:

• Turn on the power, turnstile enter the self-check mode ,The arm turn and lock up automatically.System enter into work mode after beep sound .
• After swipe legal card or QR code and fingerprint, Access control device send opening signal to main board.
• When the control board receives opening signal, the indicator and motor trigger valid signal. Then the indicator turns to green,arm turn small angle.
• Pedestrian push the arms, the arm will turn 120 degrees automatically.
• If push arm without permissions, turnstile control board alarm ,arms will be locked automatically, and then reset.

Features of Pedestrian Swing Gate:

• Support bi-directional opening
• Can integrate with access control system.
• Trigger to open by dry contact. Automatic close back after auto timer elapsed. Delay time can be programmed on swing barrier control panel.
• Trigger to open by dry contact (NC) and close by dry contact (NO). This allowed access control reader to control swing barrier opening and closing time.
• Flow direction guide with high bright led lamp.
• High speed DSP technology, life up to 5 million times.
• Malfunction self-detection, which is easy for operation and maintenance.
• Anti-tail, prevent people follow pass without verified.
• Long-life performance, high operation dependability and fast response.
• The whole system runs smoothly, low noise, no mechanical impact.
• Self-test function, when power on, system restoration automatic.
• Single directional or Bi-directional is selectable.
• LED indicator.
• Automatic reset function: when tripod turnstile receives an open single, but passenger do not pass through the hallway within a specific time (default 5s), turnstile arm will lock automatically.

• When power off, tripod turnstile arms will drop down automatically, which is complying with fire safety requirements.

• Built in clutch that will automatically disengage motor drive from gearbox when the gate is obstructed. Clutch release reduce impact force to minimum in the event that gate closed onto passing users. This also protect the motor and control panel from being damaged due to overload.
• Optional safety IR beam can be added to auto reverse the gate upon detecting obstacle in the passage way. This way the gate is reversed before even hitting user that is still in the passage way. More safety to the user.

Case of Pedestrian Swing Gate: