Wire drawing 1.5mm thickness stainless steel bridge type arm drop turnstile with infrared photocell

Introduction of Drop Arm Turnstile:

1. If power off, arm will fall automatically while power on later, arm will be automatically lift.

2. It is with standard electrical interface to connect various kinds of readers and writers for easy integration.

3. Card Mounting is available.

Applications of Drop Arm Turnstile:

Sinomatic drop arm turnstile gate can be widely used in the metro station, wharf, subway station, bus station, factories, office building , hotel, clubs, school, library, supermarket and institution that need intelligent access management.

Features of Drop Arm Turnstile:

• Fault detection and alarm functions, easy to use and maintenance.
• The running status can be programmed and controlled with the built-in keyboard on the main board.
• Mechanical antipinch function. If the gate meets resistance in the reset process, motors will stop working automatically within the prescribed time and reset again later.
• Anti-breakthrough function. The gate is locked automatically until opening signal received.
• Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds), the system will cancel the authority of the current user automatically.
• Gate can be set as normally open or normally closed.
• Can be used with variety of access control devices: IC / ID card readers, bar codes, fingerprints, etc. (Access controller needed).
• Direction can be set as single-direction or bi-direction.
• Gate auto opens when power off and auto close when power on, complying with fire safety requirements.
• Alarm function, in case of illegal intrusion and reverse intrusion, etc.

Specifications of Drop Arm Turnstile:

Cases of Drop Arm Turnstile:

.