Controller designed for powering and monitoring obstruction light is designed to reliably monitor the proper operation of the latest low power LED obstruction lights and features a range of dry alarm contacts to report all aspects of system health,meet FAAand ICAO obstruction lighting requirements.

Options to consider before ordering:

Flashing or steady (this option is for medium intensity only)
Number of medium intensity obstruction lights that will be powered from controller
With or without monitoring and alarm system (this option is for medium intensity only)
Types of beacons powered from the controller low and / or medium intensity obstruction lights (for low intensity - 230V AC and optional the photocell can be incorporated in the fixture)
An UPS can be added to the system to compensate for the lack of mains. The autonomy can be established depending on the system.

Specifications

Features

• AC input – 120V AC, 240V AC, or 277V AC
• DC input – 24V DC only
• Sophisticated current sensing enables reliable monitoring of the latest low-power LED obstruction lights
• Factory configured for up to 4 circuits of L-810 LED lights
• Monitor up to 6 illuminated head engines (single L-810 LED lights) per circuit (24 per controller)
• Each circuit shares a common transfer relay and alarm relay
• Transfer Relay Mode: In the event of a failure, all double lights in a circuit will switch to the backup second head engine
• Alarm Mode: In the event of a failure, alarm relay will indicate a fault in the circuit (if there are multiple lights in a circuit, the alarm doesn’t indicate which light failed)
• Controller can be configured to operate L-810 sidelights in flashing or steady-burn mode (flashing isn’t a standard feature)
• Controller powers lights even if the photocell fails
• FAA photocell included
• User-friendly connectors
• Integrated surge protection
• Resistant to corrosion, shock and vibration
• Operates from -67° F to +131° F (-55° C to +55° C)
• 2 year warranty

Detailed Images

Typical System Application