Product Information

Step 1 ) Pour 50g of cloned powder into a graduated cup containing 300ML of water (water temperature is preferably 25-35 degrees), and quickly stir it with a stir bar for 40-60 seconds. The stirring method is preferably egg-type stirring. The higher the water temperature, the faster the cloning powder solidifies.
Step 2 ) The stirred cloning powder slurry is shaken a few times to make the bubbles float up, and poured into the cup, put the baby's hand into the cloning powder slurry, and stand still for 2-3 minutes (do not let the baby hand touch the cup) Wall), you can apply some moisturizer to your baby's hand before putting it into the cloning solution.
Step 3 ) First press the cloned powder slurry to completely solidify, then shake the baby's hand up and down, so that the air slowly enters and slowly take out the baby's hand. Remember to be careful and careful, take out the mold and prepare it (in the process of taking the hand must be Be slow, don't worry, prevent damage to the already cloned clone model)
Step 4 ) First, fill the solidified clone powder model with water and then pour the water out to another container. Divide the poured water into two. The amount of the model powder is 2.5-3 times the half volume of the baby hand (the volume of the baby hand = the volume of the poured water), and it is fully stirred for about 1-2 minutes. After the stirring, the mixture will be The model slurry is shaken a few times to make the bubbles float.
The ratio of baby's hand clone powder to water is: 50G clone powder + 300ML water
Step 5 ) The fully stirred model powder slurry is shaken vigorously for a few times to float the bubbles and then inject the model slurry into the already solidified clone powder model, and shake evenly to reduce the bubbles (the baby's fingers are naturally slightly curved, and the model powder cavity should be First, it is inclined to form a small amount of filling mold. After a few seconds of static injection, the mold is filled. If the baby's finger is fist-shaped, first apply a small amount of filling in the direction of the baby's finger, then put the cloned powder cavity upside down for about one minute before continuing to mold.

Step 6 ) Pour out the solidified clone powder model, and slowly peel off the model of the solidified baby hand from the clone powder model. Pay attention to the moderate intensity, don't worry.

FAQ:
1.Q:Are you a factory or trading company?
A:We are a factory with excellent price-performance ratio of items.
The larger your order quantity is, lower the unit price will be.

2.Q:What information should I provide for making my own plate and trays?
A:Tell us the styles or forms,material,dimension,surface process,printing requirement,and quantity of your items.

3 Q:Do you have MOQ?
A:Depands on different ideas, Can be negotiated.
The larger the quantity is, the competitive the unit price will be.
Depands on different ideas, Can be negotiated.

4.Q:Can you help with the design?
A:Yes,we have professional designers offering free designing service.
If you can provide artwork or pictures,please send them to us in the following formats:cdr,eps,jpg,ai,psd,pdf.

7.Q:Can I get a sample,is that for free?
A:Samples in stock can be sent to you directly after you pay the freight. Only printing fee and mould charge you need to pay for in making samples.

8.Q:What about the lead time for bulk production?
A:It depends on the order quantity and the production season.

9.Q:How long can I get the sample?
A:After we receive the relevant expenses,samples will be ready and sent to you via express in 7-10 workdays.

10.Q:What payment methods do you accept?
A:We support T/T,and L/C and so far.