Mining Cement Mill Equipment With Single Side
Introducion
Ball Mill is a key equipment to grind the crushed materials, which is widely used in the manufacturing industries, such as cement, silicate, new building material, refractory material, fertilizer, ferrous metal, nonferrous metal and glass ceramics.
Working principle
This mill is used for open-flow cement grinding. The mill is divided into one, two, three (or four bins); the material feeding device enters the coarse material bin (one bin) of the mill through the spiral cylinder in the feeding hollow shaft. After the material is roughly crushed, it enters the second bin through the compartment grate and is further crushed. The material crushed to small enough particles enters the three silos through the sieve compartment. The materials are ground and finely crushed in the three warehouses. After the particles reach the fineness requirements, they are discharged out of the mill through the discharge grate, the discharge screw and the discharge device.
Name | Mining Cement Mill Equipment With Single Side |
Attributes | Cement Mill Equipment |
Power | 245Kw |
Specification (m) | Capacity (t/h) | Rotating speed (r/min) | Grinding body (t) | Motor | Reducer | Weight (t) | ||
Model | Power (kW) | Model | Speed ratio | |||||
Φ1.2x4.5 | 1.4 | 30.3 | 5 | YR250M-6 | 55 | ZD30-8 | 4.481 | 13.1 |
Φ1.5x5.7 | 3.5 | 26.34 | 11 | JR127-8 | 130 | ZD40-7 | 4 | 25 |
Φ1.83x6.4 | 6 | 23.9 | 18 | JR137-8 | 210 | ZD60-8 | 4.5 | 35.3 |
Φ1.83x7 | 6.5 | 24.5 | 20 | JR138-8 | 245 | ZD60-8 | 4.5 | 37.2 |
Φ2x9 | 9.5-10 | 23.88 | 31 | JR158-8 | 380 | ZD70-8 | 4.5 | 58.4 |
Φ2.2x6.5 | 11 | 21.4 | 30 | JRQ158-8/YR630-8 | 380 | ZD70-9 | 5 | 46.2 |
Φ2.2x6.5 | 14 Closed circuit | 21.4 | 30 | JRQ158-8/YR630-8 | 380 | ZD70-9 | 5 | 46.2 |
Φ2.2x7 | 12 | 21.4 | 30 | JR158-8 | 380 | ZD70-9 | 5 | 54 |
Φ2.2x7.5 | 13 | 21.4 | 32 | JR158-8 | 380 | ZD70-9 | 5 | 63 |
Φ2.2x8 | 14 | 21.4 | 37 | JR158-8 | 380 | ZD70-9 | 5 | 65 |
Φ2.2x9.5 | 14-16 Closed circuit | 21.4 | 43 | JR1510-8 | 475 | ZD70-9 | 5 | 70 |
Φ2.2x13 | 16 | 20.3 | 55 | YR630-8/1180/Y100L-8 | 630/11 | JD630/ZS82.5-7 | 6.3/99.96 | 114.4 |
Φ2.4x7 | 14-16 Closed circuit | 20.4 | 36 | JR1510-8 | 475 | JDX450 | 5 | 67.9 |
02.4x8 | 16-17 Closed circuit | 20.3 | 41 | JR1512-8/Y180L-8 | 570/11 | JD630/ZS82.5-7 | 6.333/99.96 | 87.2 |
Φ2.4x9 | 17-19 Closed circuit | 20.3 | 46 | YR630-8/1180/Y100L-8 | 630/11 | JD630/ZS82.5-7 | 6.333/99.96 | 93.5 |
Φ2.4x10 | 18-19 Open circuit | 20.3 | 50 | YR630-8/1180/Y100L-8 | 630/11 | JD630/ZS82.5-7 | 6.333/99.96 | 99.4 |
Φ2.4x11 | 19-21 Open circuit | 20.3 | 60 | YR630-8/1180/Y100L-8 | 630/11 | JD630/ZS82.5-7 | 6.333/99.96 | 99.4 |
Φ2.4x12 | 25-27 Closed circuit | 20.3 | 61 | YR800-8/1180/Y100L-8 | 800/11 | JD630/ZS82.5-7 | 6.333/99.96 | 112.7 |
Φ2.4x13 | 25-27 High fine open circuit | 20.3 | 66 | YR800-8/1180/Y100L-8 | 800/11 | JD630/ZS82.5-7 | 6.333/99.96 | 131.1 |
Φ2.4x13 | 21-23 Open circuit | 20.3 | 66 | YR1000-8/1180/Y160M-4 | 1000/11 | JD630/ZS82.5-7 | 6.333/99.96 | 130.4 |
Φ2.6x10 | 25-27 Closed circuit | 20.3 | 60 | YR800-8/1250 | 800 | JD800 | 5.5 | 150.5 |
Φ2.6x13 | 27-29 | 19.1 | 80 | YR1000-8/1180/Y160M-4 | 1000/11 | 5.5/280 | 169 | |
Φ3x9 | 33-34 Closed circuit | 19.6 | 79 | YR1000-8/1180/Y160M-4 | 1000/11 | NAL108/8/ZS110-19 | 8/280 | 156.5 |
Φ3x9 | 36.5 Closed circuit | 17.6 | 79 | YR118/61-8 | 1000 | 2x1250 | 42.163 | 121.13 Without motor |
Φ3x11 | 35-40 Closed circuit | 18.3 | 97 | YR1250-8/1430/YR160M-4 | 1250/11 | YNL1210 | 6.3 | 178 |
Φ3x11 | 47 Closed circuit | 17.7 | 97 | YR118/74-8 | 1250 | ZI314 | 42.39 | 169 |
Φ3x12 | 38-40 Closed circuit | 18.1 | 90 | YR1250-8/1430 | 1250/11 | JS1100-00 | 41.27 | 196.26 |
Φ3.2x11 | 40 Closed circuit | 18 | 103 | YR1400-8/1430/Y160M-4 | 1400/11 | YNL1210/ZS110-19 | 12.35/28 | 186.1 Without motor |
Φ3.5x11.5 | 65-70 Closed circuit | 16.5 | 129 | TYD143/49-8 | 2000 | ZI370 | 36.239 | 138.3 Without motor |
Φ3.5x11.5 | 50 Closed circuit | 17.2 | 126 | YR1800-8/1430/Y200L2-2 | 1800/37 | 43.02/318 | 252.27 | |
Φ3.8x13 Double slipper | 70-75 Closed circuit | 16.6 | 170 | YRKK800-8 | 2500 | JS130/MFY250 | 44.9 | 203 Without motor |
Φ3.8x13 | 60-62 | 16.3 | 170 | YR2500-10/1730 | 2500 | MFYX250 | 286 | |
Φ4x13 | 65 Closed circuit | 15.95 | 202 | YRKK900-8 | 2800 | JS130-8 | 46.7 | 264 |
Φ4.2x13 | 85 Closed circuit | 16.3 | 224 | YRKK900-8 | 3150 | MFY320 | 47.8 | 250 Without motor |
FAQ to save your precious time!
Q1: Hi, are you a mining machinery manufacturer?
Answer: Yes, we are a professional manufacturer of mining machine. Our company welcomes customers to visit our factory at any time.
Q2: How long is the warranty period of your equipment? Does your company provide spare parts?
Answer: The warranty period of our machine is one year. For those wearing parts, we guarantee to provide high-quality parts for a long time.
Q3: How long does it take to deliver?
Answer: Production usually starts after receiving the advance payment. Small machine is guaranteed to be delivered within one month. Large-scale machine is guaranteed to be delivered within 2-3 months.
Q4: Do you provide machine operation guidance?
Answer: Yes. We have professional engineers for installation, commissioning and operation guidance.