F2-H Face Recognition Device with Human Temperature Measurement and Access Control
Features
*Dynamic detection, solve the deception of photos on various carriers
*Infrared mode at night, RGB dual fill light
*Support external access control card reader, QR code scanner, ID card reader
*Support RS232 serial port, Wiegand 26/34 output, support relay, exit switch, door magnetic output content
*Support local storage of 500,000 historical records
*Support 20,000 face library
*Support public network and local area network deployment
*Support HTTP interface connection;
*Support display configuration;
*Support identification distance configuration
Face Identification System Product Specification
F2-H Facial Recognition Temperature Measure Device Datasheet-EN
Face Recognition Temperature Measure all-in-one Machine | |||
Product model | F2-H | ||
Characteristics | Main function | Face recognition temperature measurement | |
Use environmen | Indoor , semi-outdoor | ||
Color | Silver | ||
Camera | Type | RGB | Infrared |
Resolution | 2 million pixels | 2 million pixels | |
Aperture | F2.8 | F2.8 | |
Focal length | 3.18mm | 3.18mm | |
Software Dynamic |
automatic |
automatic | |
Vertical wide angle |
84° |
84° | |
Horizontal wide angle |
54° |
54° | |
Infrared supplement light | Support | ||
White supplement light | Support | ||
Core parameters | Android | Android7.1 | |
CPU | Quad-core, 1.8GHz | ||
storage capacity | RAM 2G ROM 8G | ||
Human-comput er interaction |
Monitor | 8 inches, full viewing angle, 170 ° IPS LCD screen, resolution 800 * 1280 | |
Touch screen | support | ||
Face sensing module | support | ||
Face temperature measurement module |
support,Serial / I2C interface | ||
Card reader | Support, Optional | ||
Communication method | Ethernet | 10/100 Ethernet | |
WIFI | Comply with IEEE802.11b / g / n standard (2.4G) | ||
Identification Method | Face | Support | |
IC card | Support, optional | ||
Input output interface | RJ45 interface | Support 10/100 Mbps | |
Power supply interface |
DC12V-2A | ||
Power | Adapter | DC12V-2A | |
Environmental requirements | Operating temperature | -20℃~60℃ | |
Working humidity |
20%~90% (non-condensing) | ||
Static protection level |
IEC61000-4-2, LEVEL3 | ||
External Interface Definition | |||
Type | Interface | Explanation | |
USB | USB 2.0 | Support | |
Ethernet port | RJ45 | 10/100 Ethernet | |
Relay |
NC COM NO | Relay normal off/Common/normal on.Usually,door lock supply is positively connected to the COM port,and then according to the door lock type,relay power negatively connected NO port or NC port. Note: Maximum load of relay contact is 2A | |
Gate sensor | IN GND |
Check door open/close status, input | |
Exit button | PUSH1 GND |
Press the button,door opening control signal,input | |
Serial | RX TX |
RS232 | |
Output power | 5V GND |
Support device external output 5V | |
Wiegand | WG_D1 WG_D0 GND |
Wiegand output interface, support 26bit / 34bit protocol | |
Input power | GND 12V+ | Power input:12V DC | |
Temperature measurement module | Operating temperature |
0℃ ~ +55℃ | |
Storage temperature |
-20℃ ~ +65℃ | ||
Power consumption |
< 0.3w | ||
Basic Parameters |
Pixel |
32*32 Real-time temperature output | |
Measurement accuracy |
I + 0.5℃ | ||
Measuring distance |
0.3 ~ 1.0m | ||
WIFI |
2.4G 802.11b/g/n | ||
Bluetooth |
BluetooH4.0 |