Access Control Two Arm Turnstile Motorized Pedestrian Access Gate
Two Arm Turnstile <IM.E.121> Product Specifications | ||||
Product Parameters | Dimensions: | Length 450*Width 120*Height 1000mm | Box Material: | Box: 1.5mm SUS304 Stainless Steel |
Arm Material: | SUS304 stainless steel | Channel Width: | 550~600 mm | |
Technical Parameter | ◆Material of the enclosure: Brushed stainless steel SUS304; ◆Service life: Over 15 million times of continuous operation; ◆Input voltage: AC220V±10V, 50Hz~60Hz; ◆Communication interface: RS232 serial port; ◆Driving motor: DC brushless motor (24~36VDC); ◆Operating environment temperature: -35°C~75°C; ◆Relative humidity: 0~90% (no condensation); ◆Passage speed: 30~50 people per minute (can open in memory mode); ◆Passage time: Card access passage time: 10S (if no one passes within 10S, the gate will automatically close. The time can be adjusted as needed). | |||
Function Parameter | Basic Function | ●Passage Indication Function: LED indicator boards are installed prominently on the outer frame of the gate to indicate the passage status and direction to pedestrians. | ||
●Intelligent linkage alarm: including sound and light alarms such as illegal intrusion and reverse traffic, which can be linked with other alarm monitoring equipment | ||||
●Anti-interference: It can limit the abnormality of the gate caused by external factors such as electromagnetic | ||||
●Passage mode setting: One-way pass, two-way pass, free pass, etc. can be set through the buttons on the main control board | ||||
●Anti-trailing: prevent the non-permissible situation of too many people at one time. | ||||
●Anti-pinch function: When the gate is in the process of closing, the gate will stop closing after detecting the anti-pinch signal | ||||
●Auto reset: After the gate is opened, if there is no passage within the specified time, the system will automatically cancel the user's access authority; the default is 10 seconds, and the passage time can be set by the switch | ||||
●Access control: The external port can connect a variety of biometric devices | ||||
●Power off and switch off: switch off after power off, and can set the switch opening direction | ||||
●Fault detection: The control board can support fault type detection, assist in analyzing the cause of the fault, and handle abnormal faults. | ||||
●Traffic indication: There is a traffic status indicator; and an alarm function for exceeding the stay time in the channel can be set | ||||
Expanding Function | ▲Passing mode △Normal: Normal passing mode △ Passing: automatic car/electric car/motorcycle passing mode | |||
▲Open/close delay, set the delay opening time after the gate receives the opening signal/set the delay closing time after pedestrians pass, the default is 0 seconds | ||||
▲ Swipe the card in the channel △ Disabled by default: card swiping in the channel (induction infrared area) is invalid △Allow: Card verification is allowed in the channel. | ||||
▲Whether the trailing and reversing are blocked by closing the door △Do not close the gate: the reverse/trailing (A swipe card, B pass) will not close the gate △Close the gate first and then open the gate: close the gate first for reverse/trailing traffic, and then open the gate again after closing △Do not open the gate after closing the gate: the reverse/trailing traffic will close the gate, and the gate will not be opened again after closing | ||||
▲Fire linkage △Normally open mode: the gate remains open; △ Normally closed mode: the gate remains closed | ||||
▲System language function △Chinese: The system can set the Chinese interface △English: The system can set the English interface | ||||
▲Passage Mode △Bidirectional passage,swiping card bi-directionally for people flow. △Bidirectional free passage, no credit card verification is required. △Single directional passage, Single directional (A) swiping card, and the gate opens normally for people flow; reverse directional (B) swiping card is invalid, and the gate closes. △Single directional free passage, Single directional (A) free passage, and reverse directional passing (B) require a swiping card verification. △Passing is prohibited, Bidirectional swiping card is invaild, and the gate enters the locked state. △Passing is prohibited,Bidirectional card swiping is invalid, and the speed gate turnstile enters the locked state | ||||
Product Application
Motorized two-arm turnstiles are a type of access control system commonly used in high-security areas such as airports, government buildings, and corporate offices. They consist of two rotating arms that are controlled by a motor, allowing them to rotate in opposite directions to allow or deny access to individuals.
These turnstiles are designed to prevent unauthorized access and ensure that only authorized personnel are allowed to enter a secure area. They are typically equipped with sensors that detect when someone is attempting to enter without authorization, and can be programmed to sound an alarm or alert security personnel in such cases.
Motorized two-arm turnstiles are also designed to be durable and long-lasting, with many models made from high-quality materials such as stainless steel. They can be customized to fit the specific needs of a particular facility, with options such as biometric scanners, card readers, and other access control technologies.
Overall, motorized two-arm turnstiles are an effective and reliable way to control access to secure areas, and are widely used in a variety of industries and settings.