Intelligent Pedestrian Turnstile Gate
Waist Height Stainless Steel RFID Access Control Intelligent Sliding Barrier Speed Gate High Grade Turnstile Gate
Introduction:
The Sliding Barrier Turnstile Speed Gate --- can be compatible with IC card , ID card ,barcode card , fingerprint reading card recognition device used for staff, provide civilized , orderly access methods; effectively manage the access of staff . Can be widely used in the station, wharf subway , factories, office building , hotel , clubs, intelligent community , enterprises and institution that need intelligent access management.
Features:
1. Problem-self-checking function.
2. Many options of working ways: Bi-direction card reading; One direction card reading and another no reading; One direction card reading and another freely. And single direction photocell controlled passing and close. Working ways can be set in the control panel.
3. When power off, arm open automatically and power on again, arm will be held automatically.
4. When valid card read and passenger passed, arm can be delayed to close from 1-60s which can be set in the control panel.
5. Auto-reposition function: After card read, passenger not pass within regulated time period, full-height turnstile will cancel this passing right. And the regulated time period for passing can be set by managers.
6. If passenger pass without card read or valid card read, flap barrier will alarm untill passenger get back from the Swing barrier and then take a valid card to be read for passing.
7. Swing barrier is with 485 interface for long-distrance control concern.
8. Anti-rush function: If there is no open single, arm will be holding tightly.
9. Double anti-clipping function: Photocell anti-clipping and mechanical anti-clipping. When passenger is going through the Swing barrier, photocell will detect out this situation and will not close. After passenger passed, arm will close automatically. During its reposition, if arm meets any obstacle, arm will get back automatcially or stop working for a while with very slight force. Also it will alarm.
10. Swing barrier is with standard electrical interface for the integration of various readers and writers.
11. Swing barrier can count how many passenger has passed and will show it in the LED display.
12. Direction display to guide passenger which direction is to go.
13. Card-reading with memory or without memory function.
14. Swing barrier can control the population inside in the control of software
Standard functions & features of Turnstiles Gate
1. | Auto-reposition function: After card read, passengers don‘t pass within regulated time period, turnstile will be locked automatically |
2. | Bi-direction passing or uni-direction |
3. | When power off, arm will be dropped automatically |
4. | Self-lock function: arm will be locked automatically after passenger passing |
5. | LED passing arrow can show direction to indicate passenger to pass |
6. | Standard interfaces are convenient for connection with different readers which can send relay signal |
7. | RS485 interfaces can connect turnstile with computer directly |
8. | Stable running with little noise. |
PRODUCT INFORMATION | |
Model | BS-PB200 |
Brand | BESTER |
Size/Stick length | 500*120*1000(mm) |
Arm length | 375mm |
Material | SUS304 thickness(1.5mm) |
Input Voltage | AC110-220±10%,50HZ60HZ |
Driving motor | 24V |
Failure-free operation | 10 million/time |
Weight | 60kg |
Traffic speed | 35-40 persons/min |
Opening/Closing Time | 1-3S |
Channel width | 800-1000mm |
Operating temperature | -30ºC-+70ºC |
Communication interface | RS485/TCP/IP |
Working environment | indoor and outdoor |