Bi Directional Intelligent Bridge Speed Gate Turnstile 304 Stainless Steel

Electronic Security Entrance Solution Speed Barrier Turnstile Gate With Access Control System For Pedestrian Passing

Swing Barrier Turnstiles RS 716-2 are intelligent passage management equipment researched,

developed and produced by our company. The equipment is integrated with delicate mechanical

transmission, microprocessor control, and various read/write techniques. It can be used for intelligent

control and management of the passage after equipped with different read/write devices.

Function

1. Problem-self-checking function.

2. Many options of working ways: Bidirection card reading; One direction card reading and another

no reading;

3. When power off, arm open automatically and power on again, arm will be held automatically.

4. When valid card read and passenger passed, arm can be delayed to close from 1-60s which can

be set in the control panel.

5. Auto-reposition function: After card read, passenger not pass within regulated time period, full-

height turnstile will cancel this passing right. And the regulated time period for passing can be set by

managers.

6. If passenger pass without card read or valid card read, flap barrier will alarm untill passenger get

back

STANDARD FEATURES & FUNCTIONS:

• (1). Operation model: Both directions can be set as controlled mode or free mode.

• (2). NO mode & NC mode can be switched over by users easily & freely.

• (3). Tailgating-detection function.

• (4). Intruding-alarm function.

• (5). Delayed reset automatically function.

• (6). Anti-pinch function: protection against finger entrapment and personal injury.

• (7). Emergency-escape function: the gates will open automatically by pressing the emergency button which can be remote-controlled whether the power is on or off.

• (8). With interface of relay switch (the dry contact signal or +12V electrical level signal or DC12V pulse signal of pulse width ≥ 100ms, driving current ≥ 10mA), compatible with all kinds of access controllers.

• (9). Equipped with free control software for machine interface & control command SDK.