Industrial Roadway Traffic 800mm Electric Rising Bollards 8K Mirror Surface

Roadway Automatic Road Traffic Industrial Level Controlled 8K Mirror Surface Hydraulic Rising Bollard System

Hydraulic automatic bollard mainly consists of oil pump unit and steel frame construction. It use soil pressure as dynamic to realize the rise/fall of bollard.

As a moving device, it is usually installed at vehicle entrance/exit. It rises to block the vehicle and falls the ground level to authorize free passing.

Rising hydraulic bollards Feature

High security and anti-collision ability

Pneumatic air pump in control cabinet could procide large power safely for a long time.

Electronic control, automatic rise/fall

High system independence

MAIN FEATURES

1. Automatically raise/lower/stop. The automated bollards adopt a heavy duty hydraulic power pack and operate by integrated control. Easy to install and operate. Built-in led flashing lights and reflective tap in the bollard head to ensure visibility and safety.

2. Variable frequency controller. Adopt variable frequency controller, the raise/lower speed 3-6s is adjustable. It can stop emergently during raising/lowering process. The control signal is electric transmission, quick and reliable.

3. Firm foundation plate. Thicken seamless 304 stainless steel with strong bearing capacity more than 100 tons. Rust protection and distortion resistance.

4. Built-in valve. In case of emergent issue for example power failure, the bollard can be lowered by back up battery manually to make sure the passage of pedestrians and vehicles free to go if needed.

5. Adopt high quality great power motor, the bollards can raise/lower speedy, work stable and durable with 1500 cycles working frequency per day. The motor can be disassembled for easy maintenance.

6. Multiple security protection. Use high pressure air rifle to seal up the vent, the motor can work when soaked in water with electricity leakage protector.

PRODUCT PARAMETERS

PRODUCT FUNCTIONS & FEATURES

1. Anti-collision:It can be used normally after being hit by a 12-ton vehicle.

2. Anti-destructive power:After being hit by a 16-ton vehicle, Hydraulic road bollards deformation.

3. internal structure:With load-bearing steel beam and column, anti-collision steel beam column,

4 navigation rods

4. Can be manually lowered in the event of a power outage

5. Linkage interface

6. Reversible operation according to requirements during ascent and descent

7. Noise during operation of the device≤60 dB

8. Waterproof integrated hydraulic drive

9. Control solenoid valve 24V

10. Control box display text adjustable (up, down, start, time control adjustment)

11. Display text in English

12. Water immersion performance:no leakage during 48 hours and normal lifting

13. Anti-corrosion performance level: 9