600mm Access Control Swing Turnstile Gate Movement Mechanism Cylinder Speed Gate Barrier Crowd Control

OUR ADVANTAGES

* Precise and reliable brushless motor + encoder precision control + precision clutch, 8 million stable operation,

locker lock, unlock, run more accurate and reliable.

* Mechanical + infrared induction + circuit control triple anti-pinch anti-collision, illegal intrusion and trailing alarm,

free power failure, in line with fire requirements.

* The whole system runs smoothly and silently, and has fault self-test and alarm prompt function, which is

convenient for maintenance and use.

MAIN FUNCTION AND FEATURES

1. Problem-self-checking function.

2. Arm Turning: Bi-direction

3. When power off, arm open automatically and power on again, arm will be held automatically.

4. When valid card read and passenger passed, arm can be delayed to close from 1-60s which can be set in.

5. Auto-reposition function: After card read, passenger doesn’t pass within regulated time, turnstile

will cancel order automatically. And the regulated time can be set by managers.

6. Anti-rush function: if there is no open single, arm will be holding tightly.

7. Stable running with little noise.

Functions:

1. Self-test and alarm function,user-friendly maintenance and use ;With automatic reset function,gate opening after a specified period of time. If user does not pass,the system will automatically cancel the user's current access permission; Auto-reset delay, the standard automatic reset is after 10 seconds.

2. Through the main control on the half-built small-press plate,Programmable devices show running status.

3. When valid card is read and passenger passed,arm can be delayed to close from 1-10s which can be set on the control panel.

4. One-directional,bi-directional function.

5. Auto-reposition function:After card is read,if passenger does not pass within regulated time period,swing gate will cancel this passing permission,The regulated time period for passing can be set by management.

6. If passenger passes without card being read or valid card read,Swing barrier will alarm until passenger gets back from the swing barrier and then uses a valid card to be read for passing.

7. Erosion control features,in the absence of gate opening signal receipt,the arm will automatically be locked.

8. Anti-rush function:if there is no open signal arm will hold tightly.

9. Adjustable arm swing synchronized (for the double pendulum case).

10. Adjustable normally open or closed, in order to meet the requirements of the different venues.

11. Connecting with a variety of reading devices which can be linked to the receiving signal relay switch.

12. Swing gate is with RS485 interface for long-distance control concern and the integration of various readers and writers. Managing computer directly through the remote control and management .

13. Auto power-off flap opening,power-on self-closing,Meets fire safety requirements.

14. Double anti-clipping function: photocell anti-clipping and mechanical anti-clipping.When passenger is going through the swing barrier,photocell will detect this situation and will not close. After passenger has passed,arm will close automatically. During its reposition,if arm meets any obstacle,arm will get back automatically or stop working for a while with very slight force. Also it will alarm.

15. Direction display to guide passenger which direction to go.

16. Card-reading with memory or without memory function.

17. Swing barrier can control the population inside in the control of software.

18. Stable running with little noise.