Features
512 Channel Battery Testing Equipment is a popular newly developed battery testing system for Li-ion cells, LIPB, Ni-MH cells, Ni-Cd cells.
This Equipment can be used as research machine, as cell positive /cathode pole material, battery cycle life testing etc.
This Equipment also can be used in pilot run period and in quality assurance department, since it has functions as formatting cells, grading capacity, testing cells group,checking battery pack, and processing test data,etc.
We AITOP provide all kind of lithium battery pack assembly machines and solutions with good quality and services. Our products including: 1.IR tester 2.Capacity tester for cylindrical &prismatic&polymer cells 3.BMS tester 4.Sorting machine for common use 5.Insulation paper sticker machine 6.Manual spot welding machine 7.Automatic spot welding machineso as to realize the energy feedback of battery discharge electric energy.
Working power | Three-phase five-wire system AC380V±10%, 50HZ | ||
Work environment | Temperature 0-40 degrees, relative humidity ≤80% | ||
Heat dissipation | to enter the air naturally and exhaust the air upward | ||
Overall energy saving | over 70% | ||
Channel Parameter | |||
Voltage measuring range | 0-5V, 1MV resolution | ||
Battery voltage range | Charge 0-4.5V: Discharge 4.5-2V | ||
Constant voltage range | 2.5V-4.5V | ||
voltage accuracy | ±(1‰ reading +1‰ full) | ||
Current accuracy | ±(1‰ reading +1‰ full) | ||
Software Function | |||
Control mode | Computer connection equipment work, FCL control | ||
Communication mode | RS485 baud rate 57,600 | ||
Process set | A maximum of 32 work steps and 256 cycles are se | ||
Charging mode | Constant current, constant pressure | ||
Charging cutoff condition | Voltage, current, time, capacity | ||
Discharge | constant current | ||
Discharge cut-off condition | Voltage, time, capacity | ||
Defensive function | Overvoltage, undervoltage, overcurrent, undercurrent, overcapacity, etc | ||
Time range | Set it anywhere from 0 to 30,000 minutes | ||
Time accuracy | ≤±1‰ | ||
Sampling inspection period | ≤3S | ||
Minimum frequency of data recording | ≤5S | ||
Battery sorting | By capacity, time, discharge platform, etc | ||
Data processing | Data, graphs, and loop diagrams |
XWELL can provide different fixtures for different types of cells