Lithium Battery Washing Machine
Introduction:
The battery washing test rack body is provided with a test box, the lower part of the test box body is provided with a washing box, the test box body is provided with a rotary paddle, the side of the test box body is provided with a drying device, the input end of the rotary paddle is connected with a drive motor, the washing box is a box with a lifting structure, the washing box is lifted up and forms a sealed cavity with the upper edge of the test box body, the rack body is provided with a control panel and a water tank, and the washing box is connected with the water tank through a pipe, The structure design is scientific, which solves the problem that the battery washing is completely carried out by manual steps, greatly shortens the test time, improves the test accuracy, and saves time and effort.
battery washing test machine is suitable for the following batteries or battery packs
1, hand-held electronic products with lithium-ion battery pack
2, may be placed in the pocket to carry or use of portable electronic products with lithium-ion battery pack
3, other portable electronic products can be placed in the pocket to carry the battery pack
4, the installation of non-user replacement type battery / battery pack of hand-held electronic products such as washing test
Meet standard:
GB31241-2014
Speicification:
NO | Item | Parameter |
1 | Control mode | PLC touch screen control |
2 | Drive mode | Servo motor drive |
3 | Solution temperature range | room temperature "80 C (adjustable), common temperature is 45±2℃ |
4 | Outer diameter of test turntable | 500+10mm |
5 | Test barrel diamete | 650mm |
6 | Test barrel depth | 600mm |
7 | Turntable speed | 1-850r/min adjustable |
8 | Inner box materia | SUS#304 stainless steel |
9 | Outer box material | cold-rolled steel plate paint treatment |
10 | Test time | 0-9999H/M/S adjustable |
11 | Temperature control mode | P.I.D control |
12 | Washing solution | configure a solution with a pH value of 11.0+0.1 (NaOH solution with a mass fractionof 0.004% can be used), and heat the solutionto(45±2)℃ |
13 | Dimensions | 1200x1150x1880 mm (width x depth x height) |
14 | Power supply | AC220V |
15 | Power | 6KW |
Details: