Module Pack Electric Vehicle Battery Test Solutions Automotive Battery Test Equipment
System Specification
1. The CE-6000 test system is designed to test high - capacity battery modules and packs . This battery test system is distinct from high - level accuracy , stability , dynamical rapid response speed , and multi - channel flexible features .
2. The CE-6000 system is available for the Direct Current Internal Resistance ( DCIR ) , Cycle Life, and Driving Stimulation tests .
3. The CE-6000 system is capable of energy regenerative system that maximizes the cost efficiency by allowing the electrical energy produced during discharge to be returned to the electrical grid . This system supports multiple test channels .
CE-6000 battery test system Introduction:
A. Power battery simulation , C-rate test.
B. Life cycle test .
C. Power test , capacity test , energy density test.
D. Power battery virtual distribution: charge/discharge curve fitting , battery consistency test and evaluation.
E. High rate charge or discharge test.
F. Power battery , serial energy - storage battery module test : single cell voltage , single cell temperature monitoring ( high - voltage equipment ).
Charge | Charge modes | Constant current , Constant voltage , Constant current and voltage , Constant power | |
Cut - off condition | Main channel - Voltage , Current , delta Time , Capacity , - delta V | ||
Discharge | Discharge modes | Constant current , Constant voltage , Constant power , Constant resistance | |
Cut - off condition | Main channel - Voltage , Current , delta Time , Capacity |
Pulse | Charge | Constant current , Constant power |
Discharge | Constant current , Constant power | |
Min pulse width | 100ms | |
Pulse counts | Each pulse step supports 32 different pulses | |
Chg and Dschg switch | Supported | |
Cut-off condition | Voltage, Time | |
Cycle | Max cycles | 65535 |
Max steps | 254 | |
Cycle nest | Nested loop Function,Max Support 3 Layers |