Automated Livestock Poultry Manure Removal System Hot Dipped Galvanized

Features

1. High efficiency, more than 95% ;
2. Sprocket and pulley are processed by black oxide;
3. Thoroughly hot galvanized , anti-oxidation, a best choice for chicken house;
4. Simple structure but compact, easy to repair and maintenance;

Manure Collecting Machine Installation Precautions

1. It is required that the chicken house must be hardened, the ground is flat, there is no convexity and concave place, the slope control should not exceed 2 degrees up and down. The excrement should be 5-10 degrees lower on the other side. So that the water can be drained smoothly.

2. Place the chicken cages straight and adjust the foot adjuster so that the height deviation between the two cages should not exceed 0.5 mm, and the distance between the legs should not exceed 0.5 mm.

3. Main engine should be firmly fixed, also the head and tailstock should be firmly fixed to the ground without loosening.

4. Install manure belt or scraper, and check whether the manure belt and the manure baffle are suitable.

5. The electrician installs the wiring and control line, and finds the position of the travel switch, and fixes it firmly;

6. The controller must contain a leakage protection device;

7. The test running is performed by a person on the control panel in a jog mode, and multiple persons should cooperate to ensure that there are no scratches, jams, deflection, etc. in the equipment. If problems are found, find out the reasons and solve them in time. Start and run when it is confirmed that there is no error;

8. If the operation is stable, the manure removal is uniform and there is no too much noise (less than 40 decibels). There is not much jitter. That is qualified.

Mechanical Manure Collecting Machine Characteristics