Automatic Poultry Floor Chicken Breeding
Equipment Broiler Pan Feed System For Poultry Chicken
Poultry Floor Broiler Chicken Breeding Equipment
Poultry floor chicken breeding equipment is mainly designed for broilers and baby chicks raising. Feeding system use pan feed system, which is made of PE material. The edge of the feeder pan is tilted to the center of it, thus it can avoid the waste caused by the feed spilling. Each of the chicken feeder pan can feed the number of chickens about 14-16 broilers and pullets. The poultry feeding machine is easy to clean and install.
Broiler Pan Feed System Data
1. Main Feeding Line Hoppers
| 800KGS, 1.0mm thickness hot galvanized |
2. Silo
| 3.5tons, 4tons, 5tons, 8tons, 10tons, 13tons, 15 tons, 20tons, 33tons,hot galvanized |
3. Pan feeder
| 16 grid 4 feed pans/3m Feed pan capacity: 50-55 broilers/pan |
4. feed controller pan(with sensor)
| imported from Germany time delay range: 0-2hours The sensor is usually installed at the end of each feeding line which controls motor on and off to achieve feed delivery automatically. The motor will start working and convey feed when sensor doesn't touch feed, the motor will stop conveying feed when sensor touchs feed. |
5. Driving motor
| Taiwan Wanxin brand Power: 0.75Kw/1.1Kw/1.5Kw, Voltage:380V/220V/others, three-phase/single-phase Frequency:50Hz, AC current |
6. Augers | diameter:36mm, high carbon manganese steel |
7. Feeding Line Boosting Pulley | Dia: 9cm ;cast iron material |
8. Anti-perching system | It prevents chickens from staying on the ground for too long. |
9. Lifting Winch | MRS3000, cast iron |
Poultry Floor Chicken Breeding Equipment Advantages
1. Made of high-resistant injected plastic PP;
2. Six-position regulator that enables the correct amount of feed to be delivered according to the age of chickens, just need to catch two ears in the inner and pull them out adjust up and down;
3. Easy assembly and disassembly system for cleaning the pan;
4. A flange is incorporated to keep the pan suspended for handling;
5. The pan bottom can be disassembled on the ground, which can be used for day-old chicks;
6. V-shape plate design can reduce feed storage on bottom, so birds can always eat fresh feed, which also prevents birds staying on the plate for a long time;
7. The edge of pan plate tilt towards the center, which avoids waste of feed, the smooth edge prevents birds craws hurting and make sure safe and comfort feeding;
8. The pan features fins and lips to prevent the feed from falling into the chicken's bedding and being wasted.