Stainless layer chicken cage poultry farming hen cages feeding system
A tyepe layer cage
Product introduction
Hanging cage 410x410 step cage for laying hens, suitable for laying hens or breeding hens. Each cage net 2150 mm long, 410 mm wide, each cage divided into five doors, each door 430 mm long, 410 mm deep, 410 mm high. Each breed has 4 animals. The chicken has an area of 441 square centimeters. Each cage net feeding capacity of 20.
Characteristics of gantry feeding
In the bottom of the chicken coop 10 to 15 cm from the ground to install a manure removal track, cage-raised chicken manure production scattered on the manure removal belt, in the longitudinal flow of air or the action of the coop air duct, most of the moisture of chicken manure out of the house or significantly reduced, so that the water content of chicken manure greatly reduced. In the process of feces cleaning, the chicken feces removed from the house is granular, easy for subsequent processing, and reduces the ammonia concentration in the chicken house due to the smooth and smooth manure removal belt. Chicken manure from the house to the house outside the manure truck or adjacent organic fertilizer factory pipeline whole process, chicken manure does not fall to the ground, the level of biological safety significantly improved
Modern farmers chickens leave the chicken equipment, poultry equipment producers do chicken is a good helper, chicken equipment are very mechanization, now to be able to use fixed number of year is very long, which requires the farmers for the equipment to conduct regular maintenance and maintenance, so as to ensure that equipment can perennial of normal work for farmers, increase the chicken farm productivity, In daily use, we must pay attention to the following points:
1. When using the feeder, farmers must pay attention to the fact that the feeder can not put things on it, otherwise it may cause the motor to bear too much pressure and burn out the motor.
2, after raising a batch of chickens, the chicken feed line motor shaft with butter maintenance, motor bucket can drop a few drops of vegetable oil, prevent rust.
3, after raising a batch of chickens, check the material line buckle and lifting system and other places of the screw fastening again.
4, material line control line switch and contact, check whether there is loose, in order to prevent poor contact.
3 tier | 2.15*2.3*1.5 m | 120 chickens |
4 tier | 2.15*2.3*1.7 m | 160 chickens |
5 tier | 2.15*2.3*1.9 m | 200 chickens |