Power Battery Pack Automatic Lithium Battery Spot Welder Cylindrical Battery Special

Equipment introduction

● This lithium battery spot welding machine adopts the electric precision rotating welding head independently developed by ceebo technology. The 135° rotating welding head design can set the rotation Angle of the welding head according to the slot position of the nickel sheet to avoid welding errors caused by the failure of the welding head to rotate. At the same time, it has the function of anti-sticking needle.

● The left and right sides are welded at the same time, the left and right platforms can be independently set welding parameters, and the welding path and rotation Angle and direction can be independently set according to different welding requirements.

● HD LCD touch screen, human-machine interface, easy to operate. Manual programming, CAD drawing, importing spot welding path, fast programming. Simple and easy to learn, ordinary workers can set.

● Energy switching function, can store 4 groups of energy modes, different materials automatically switch different welding energy.

● Production count function, set the production quantity, complete the output automatically stop.

● Welding needle compensation function, set the number of welding needles, and automatically remind when the number of repairing needles is reached.

● Manual debugging function, you can fine-tune the welding head of each point, and save the spot welding parameters (easy to modify the welding coordinates), you can also use the one-click correction function to adjust.

● The designed structure (forward forward out or forward forward out) can be connected with the back-end production line, and can be taken out on the other side after welding to improve production efficiency.

● Blast welding, virtual welding, automatic alarm of welding equipment, manual adjustment of welding error area, automatic repair welding, can also set single point repair welding.

● Taiwan upper silver rod guide module, high precision, low noise, smooth sliding, durable.

● Aluminum alloy skeleton, imported acrylic shielding plate, beautiful and generous sense of science and technology, visual operation to improve the production safety factor.

Device action flow description

The battery cell/bracket/battery nickel piece is loaded into the fixture -- the fixture is placed in the sensing position -- the device

automatically spot-welds the device to the extraction position (select the discharge method: forward forward out, forward forward

out) -- the battery pack is removed from the fixture -- and the next production cycle is carried out

Technical specification

Function Introduction

1. Transistor welding power supply

Welding energy output is the most stable power supply, real-time display of welding voltage and current waveform, current rising fast, can achieve high quality welding in a short time.

2. Hd touch screen

Real-time display of welding data, welding hole location. System parameter setting is simple and easy to learn.
Support manual programming, CCD mapping, import solder joint path to achieve fast programming.

3. Electric rotating welding head

The welding head can be welded by 135° rotation, suitable for special-shaped nickel sheet, and also has the function of anti-sticking needle.

The built-in pressure sensor can monitor and control the instantaneous output pressure of the welding head.

Application case

1. Energy storage battery pack 2. Electric bicycle battery pack 3. Power tool battery pack