MachineU > China Products > Machinery > Welding Equipment > Other Welding Equipment
IEC60320-1 Switch Tester Coupler Lateral Pulling Test Machine
IEC60320-1 Switch Tester Coupler Lateral Pulling Test Machine
Specifications
Brand Name :
KingPo
Certification :
Calibration Certificate
Place of Origin :
China
MOQ :
1
Price :
To be quoted
Payment Terms :
T/T
Packaging Details :
safety carton pack or plywood box
Standard :
IEC60320-1, figure 19
Flexible cable bending height :
40±2 mm, adjustable.
Pull range :
0-100N
Pull way :
Manual operation,50 times in one direction and then 50 times in the opposite direction.
Description

Coupler Lateral Pulling Testing Apparatus

Product Information:

This device is according to the IEC60320-1, figure 19 standard requirement to design. It is used for the testing of withdrawing appliance inlet under the conditions of the connector with force, for this reason to test the mechanical strength of the connector.

Technical Parameters:

1, Flexible cable bending height: 40±2 mm, adjustable.

2, Pull range: 0-100N.

3, Pull way: Manual operation,50 times in one direction and then 50 times in the opposite direction.

4, Conductor Selection and the corresponding test lateral pulls value table

Table 7 - Values for the lateral pulls applied

Rated current of connector

A

Pull

N
2.5 6
6 35
10 35
16 50

Using method:

1. Select the corresponding apparatus input socket according to the required test of the connector to install and tighten.

2. Insert the connector into the input socket of the appliance, you can adjust the adjustment block properly for other special connectors.

3. With the spring balance end to lock the connector soft cable, flat on the bakelite supporting block.

4. To pull the connector to the required test force, and the position can be adjusted.

5. Normal test, after pulling 50 times, rotate connector and appliance input socket 180°, and then pull 50 times. Do not need to release spring balance end, then corresponding rotation.

After the test, whether to enter the follow-up test according to the connector is damaged or not.

Note:

1. Ensure that the terminal is clamped and pay attention to safety when testing;

2. When spring scale is not in used, it should be kept loose state;

3. Apparatus should be kept dry, dust proof, pay attention to the maintenance of the equipment after the test is completed.

IEC60320-1 Switch Tester Coupler Lateral Pulling Test Machine

Product tags

crimp pull tester

,

wire crimp pull tester

,

wire pull tester
Send your message to this supplier
Send Now

IEC60320-1 Switch Tester Coupler Lateral Pulling Test Machine

Ask Latest Price
Product Detail
Brand Name :
KingPo
Certification :
Calibration Certificate
Place of Origin :
China
MOQ :
1
Price :
To be quoted
Payment Terms :
T/T
Contact Supplier
IEC60320-1 Switch Tester Coupler Lateral Pulling Test Machine

KingPo Technology Development Limited

Verified Supplier
9 Years
hong kong, hong kong
Since 2000
Business Type :
Manufacturer
Main Products :
Battery Testing Machine, Lamp Cap Gauge, Test Equipment
Employee Number :
50~200
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Plug Socket Tester
MachineU China Products Machinery Welding Equipment Other Welding Equipment
Contact Supplier
Submit Requirement