MachineU > China Products > Electrical Equipment & Supplies > Electrical Supplies > Plugs & Sockets
Securement Of Pins Australian/NZ Plugs And Socket Outlets AS/NZS 3112:2017 Test
Securement Of Pins Australian/NZ Plugs And Socket Outlets AS/NZS 3112:2017 Test
Securement Of Pins Australian/NZ Plugs And Socket Outlets AS/NZS 3112:2017 Test
Securement Of Pins Australian/NZ Plugs And Socket Outlets AS/NZS 3112:2017 Test
Securement Of Pins Australian/NZ Plugs And Socket Outlets AS/NZS 3112:2017 Test
Securement Of Pins Australian/NZ Plugs And Socket Outlets AS/NZS 3112:2017 Test
Securement Of Pins Australian/NZ Plugs And Socket Outlets AS/NZS 3112:2017 Test
Securement Of Pins Australian/NZ Plugs And Socket Outlets AS/NZS 3112:2017 Test
Securement Of Pins Australian/NZ Plugs And Socket Outlets AS/NZS 3112:2017 Test
Securement Of Pins Australian/NZ Plugs And Socket Outlets AS/NZS 3112:2017 Test
Specifications
Brand Name :
KingPo
Certification :
Calibration certificate
Place of Origin :
China
MOQ :
1
Price :
To be Quoted
Payment Terms :
T/T
Supply Ability :
10 sets per month
Delivery Time :
30 working days
Packaging Details :
safety carton pack or plywood box.
Standard :
AS/NZS 3112:2017 Clause 2.13.9
Application :
Securement of pins
Test sample :
Australian/NZ Plugs and socket-outlets
Precondition :
needed
force applied :
18 ±1 N
warranty :
1 year
Description
AS/NZS 3112:2017 Test Device for Securement of pins for Australian/NZ Plugs and socket-outlets
AS/NZS 3112:2017 Clause 2.13.9 Test Device for Securement of pins
2.13.9 Securement of pins
2.13.9.1 Movement of pins
Plugs shall be tested for pin movement by clamping the pin or pins not under test in a rigid holding block positioned 5 ±0.5 mm from the plug face and applying a force of 18 ±1 N to the pin under test. The design of the block shall be such that the pin under test shall not
come into contact with the block during the test.
Except for non-rewireable plugs, the test shall be carried out without a cord attached to the plug, and with the terminal screws loosened sufficiently to allow a 1 mm2 conductor to be connected.
The plug and test equipment shall be preconditioned at a temperature of 40 ±1°C for 1 h,without the test force applied. Throughout the test, all parts of the plug and test equipment shall be maintained at this temperature.
For all plugs, the point of application of the force shall be 14 ±0.5 mm from the face of the plug along the pins, and the direction of the force shall be—
(a) in both directions along the line perpendicular to the plane of the pin, and passing
through the centre of the pin; and
(b) in that plane in both directions along a line at right angles to that specified in
Item (a).
Over a period of 10 s, the force shall be gradually applied to each of the pins in the manner prescribed in Items (a) and (b), maintained at its maximum value for 10 s, and then released. The deflection of the pins shall be measured along the line of force relative to the
face of the rigid holding block during the period when the force is applied. The maximum deflection shall not exceed 2.0 mm.
Following the test on all pins of a plug conforming to Figure 2.1, any distortion 5 min after the completion of the test on the last pin shall be such that it will not prevent the plug from being inserted in the appropriate standard gauges shown in Appendix A, Appendix B and
Appendix F without the application of undue force.
For other types of plugs, any distortion after 5 min shall be such that will not prevent the plug being inserted into an appropriate socket-outlet without the application of undue force.
Securement Of Pins Australian/NZ Plugs And Socket Outlets AS/NZS 3112:2017 Test
Securement Of Pins Australian/NZ Plugs And Socket Outlets AS/NZS 3112:2017 Test
Securement Of Pins Australian/NZ Plugs And Socket Outlets AS/NZS 3112:2017 Test
Product tags

sockets iec 60309 plugs

,

electrical socket names

,

wago electrical connectors
Send your message to this supplier
Send Now

Securement Of Pins Australian/NZ Plugs And Socket Outlets AS/NZS 3112:2017 Test

Ask Latest Price
Product Detail
Brand Name :
KingPo
Certification :
Calibration certificate
Place of Origin :
China
MOQ :
1
Price :
To be Quoted
Payment Terms :
T/T
Contact Supplier
Securement Of Pins Australian/NZ Plugs And Socket Outlets AS/NZS 3112:2017 Test
Securement Of Pins Australian/NZ Plugs And Socket Outlets AS/NZS 3112:2017 Test
Securement Of Pins Australian/NZ Plugs And Socket Outlets AS/NZS 3112:2017 Test
Securement Of Pins Australian/NZ Plugs And Socket Outlets AS/NZS 3112:2017 Test
Securement Of Pins Australian/NZ Plugs And Socket Outlets AS/NZS 3112:2017 Test

KingPo Technology Development Limited

Verified Supplier
9 Years
hong kong, hong kong
Since 2000
Business Type :
Manufacturer
Main Products :
Battery Testing Machine, Lamp Cap Gauge, Test Equipment
Employee Number :
50~200
Certification Level :
Verified Supplier
Discover similar products
View More
Watch related videos

Find Similar Products By Category:

Supplier Homepage Products Plug Socket Tester
MachineU China Products Electrical Equipment & Supplies Electrical Supplies Plugs & Sockets
Contact Supplier
Submit Requirement