MachineU > China Products > Machinery > Machine Tool Equipment > Bending Machines > Other Bending Machines
AS/NZS 3112:2011 Standard Force For Pin Bending Tester Clause 2.13.7.2
AS/NZS 3112:2011 Standard Force For Pin Bending Tester Clause 2.13.7.2
AS/NZS 3112:2011 Standard Force For Pin Bending Tester Clause 2.13.7.2
AS/NZS 3112:2011 Standard Force For Pin Bending Tester Clause 2.13.7.2
AS/NZS 3112:2011 Standard Force For Pin Bending Tester Clause 2.13.7.2
AS/NZS 3112:2011 Standard Force For Pin Bending Tester Clause 2.13.7.2
AS/NZS 3112:2011 Standard Force For Pin Bending Tester Clause 2.13.7.2
AS/NZS 3112:2011 Standard Force For Pin Bending Tester Clause 2.13.7.2
Specifications
Brand Name :
KingPo
Certification :
Calibration Certificate
Place of Origin :
China
MOQ :
1
Price :
To be quoted
Payment Terms :
T/T
Supply Ability :
2 units per month
Delivery Time :
30 working days
Packaging Details :
plywood box
Model Number :
AS/NZS 3112:2011 Clause 2.13.7.2
Standard :
AS/NZS 3112:2011
Clause :
2.13.7.2
test sample :
pin
interval between successive cycles :
10 s
duration of one cycle :
60 s
warranty :
1 year
Description
AS/NZS 3112:2011 Clause 2.13.7.2 Force for pin bending tester
2.13.7.2 Pin bending test
All flat pins of plugs rated up to and including 15 A shall be subjected to a pin bending test.
Three sample plugs not subjected to any previous tests shall be tested as follows:
Pins of assembled plugs shall be tested by clamping the plug in a rigid holding block and applying a bending force, as shown in Figure 2.8, to the pin under test.
The pins shall be straight at the beginning of the test. If there is any doubt about the straightness of the pin, it shall be checked by the appropriate plug gauge shown in Appendices A, B or F.
The point of application of the force shall be 14 ±0.5 mm from the face of the plug.
The direction of the force shall be along a line parallel to the face of the plug.
Active and neutral pins shall be forced towards the centroid of the plug and then back to the starting point. On the first sample plug, any earth pin shall be forced but in one direction only and then forced back to the starting point. On the second sample plug, any earth pin shall be forced in the opposite direction to that used for testing the first sample plug. On the
third sample plug, any earth pin shall be forced in the direction that gave the least favourable result during testing of the first two sample plugs.
NOTE: This is intended to simulate damage that may occur when a plug is walked on and bent
pins are straightened.
The distance moved from the point of application shall be 7.5 ±0.3 mm, and then the pin shall be forced back to the starting point. Any ‘spring-back’ is ignored.
NOTE: ‘Spring-back’ means that the pin is allowed to move back to a position less than the travel distance, when the force is removed.
The travel from the starting point to the end point (7.5 mm) and back to the starting point is one cycle (i.e. one cycle is two separate movements).
The speed of deflections shall be a maximum of 50 mm/s, without intentional delay between consecutive movements within each cycle.
AS/NZS 3112:2011 Standard Force For Pin Bending Tester Clause 2.13.7.2
AS/NZS 3112:2011 Standard Force For Pin Bending Tester Clause 2.13.7.2
The interval between successive cycles shall be a minimum of 10 s.
The duration of one cycle shall be a maximum of 60 s.
The pins shall be tested for 20 complete cycles.
After the tests the pins shall be inspected with normal or corrected to normal vision.The pin shall not be broken off.
NOTE: Cracking of the pin, less than full thickness, is not deemed to be broken off.If in doubt, pins shall be disassembled from the plug and any insulation removed.
NOTE: In some cases the break may be below the face of the plug or the insulation may hold the broken pieces together, retaining electrical contact.

Figure 2.8 Application Of Force For Pin Bending Test AS / NZS 3112

Figure 2.1 dimensions of plugs
Figure 2.2 apparatus for flexing test
Figure 2.3 form of pin
Figure 2.4 dimensions of insulation on insulated live pins
Figure 2.5 pressure test apparatus for insulation on insulated plug pins at high temperature
Figure 2.6 impact test apparatus for insulation on insulated plug pins at low temperature
Figure 2.7 abrasion test apparatus for insulation on insulated pin plugs
Figure 2.8 application of force for pin bending test
Figure 2.9 mounting of plug for temperature rise test
Figure 2.10 pin clamping unit for the temperature rise test
Product tags

266 clamp multimeter

,

tension bmeter athinas

,

push pull force gauge
Send your message to this supplier
Send Now

AS/NZS 3112:2011 Standard Force For Pin Bending Tester Clause 2.13.7.2

Ask Latest Price
Watch Video
Product Detail
Brand Name :
KingPo
Certification :
Calibration Certificate
Place of Origin :
China
MOQ :
1
Price :
To be quoted
Payment Terms :
T/T
Contact Supplier
video
AS/NZS 3112:2011 Standard Force For Pin Bending Tester Clause 2.13.7.2
AS/NZS 3112:2011 Standard Force For Pin Bending Tester Clause 2.13.7.2
AS/NZS 3112:2011 Standard Force For Pin Bending Tester Clause 2.13.7.2
AS/NZS 3112:2011 Standard Force For Pin Bending Tester Clause 2.13.7.2

KingPo Technology Development Limited

Verified Supplier
9 Years
hong kong, hong kong
Since 2000
Business Type :
Manufacturer
Main Products :
Battery Testing Machine, Lamp Cap Gauge, Test Equipment
Employee Number :
50~200
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Plug Socket Tester
MachineU China Products Machinery Machine Tool Equipment Bending Machines Other Bending Machines
Contact Supplier
Submit Requirement