300L Powder Container Mixer for Easy and Consistent Mixing Operation
Introduction:

The DEGOLD CM series container mixer is widely applied in various powder and particle materials industries. With geometric shaped "Z" blade, any desired mixing result can be dependably obtained. The average mixing time is 3-6 min. Operator can add additional materials into mixer by outlet valve.

The container mixer consists of a mobile container and the actual mixer. Here, the container performs several functions from charging to emptying, because it serves as a transport container before and after mixing, as a mixing container during mixing, and as a storage container for subsequent further processing.

Mark Introduction:
1) "CM"-Degold container mixer

2) "-D"-two mix blades, "no mark"-one mixing blade

3) "300"-total container volume

Note: CM300, means degold container mixer with 300L container and two mix blades.



Applications

Powder coating
Master batch (PE, PP, PA, PVC, PS, ABS, TPE, EPS...)
Dye concentrates
Additives (e.g. TiO2, CaCo3, Zn, MgO...)
Toner (premixtures and finished mixtures)
PVC (hard/soft) preparation (without cooling)
Metal compounds (MIM)
PTFE
Silicic acid with liquids
Brake linings
Leather fibers
Construction materials
Food
Cosmetics
Pencil and colored pencil leads

Advantages
Separated control cabinet
The special cleaning position
Geometric two mix blades
Many usage of container
PLC control
Ex motor

The CM series of container mixers provide the best alternative to conventional high speed mixers when production conditions require a high versatility and a wide range of different products to be mixed with the same mixer.
Thanks to the container mixer special design divided into two separate units, mixing head and protable container, the cleaning time between batches is minimized therefore the risk of contamination too when switching from one type of production to another.
Mix, storage and transportation are optimized by directly using the same containers that can be easily inserted in a dosing system either to a weighting scale or an extruder feeder.


Germany MIXACO mxier

Partners: