1.Malt Milling Unit | |
2.Brewhouse Unit | Mash tun, Lauter tun, Boiling Kettle, Whirlpool tun in various combination |
Hot water tank and cold water tank for optional in special combinations | |
Stainless steel or copper cladding are popular | |
Two stages or single stage heat exchanger for wort cooling | |
Completely stainless steel integrated work platform | |
Sanitary and efficiency wort pump | |
All pipings and fittings | |
3. Fermentation Unit | Standard stainless steel 304 conical cylindrical fermentation tanks |
Single size as brewhouse is common used in restaurant | |
Tanks quantity is exactly calculated by fermentation cycle for various beers | |
All manhole, valves, pressure gauges, fittings etc are included | |
4.Beer Filter Unit(optional) | In restaurant or bar, beers are always served as craft beer without filtration |
5.Bright Tank Unit | Standard stainless steel bright tanks for beer maturation, conditioning, service, carbonation |
Single size as fermenter is common used in restaurant or bar | |
Tanks quantity is exactly calculated for various beers and the function | |
All manhole, valves, stone, gauges, fittings etc are included | |
6.Cooling Unit | Insulated glycol water tank with or without copper coil for glycol liquid holding and mixing |
Efficiency chillers or refrigerators with fryonto supply cooling energy | |
Sanitary centrifugal pump for glycol water recycle among tanks and heat exchanger | |
All pipes, fitting, insulation materials are included | |
7.Controlling Unit | Electrical controlling cabinet with temperature, on-off controlling for brewhouse |
Electrical controlling cabinet with temperature, on-off controlling for cooling parts | |
Temperature controller, thermocouple, solenoid valves etc are included | |
PLC with touch screen panel for special request | |
8.Beer Cleaning Unit | Acid tank/ Caustic tank/Sterilize tank /Hot water recycle tank; |
Washing pump | |
Control system | |
All pipes, fitting, insulation materials are included |
Working volume: | 1000L |
Design temperature: | Min:0℃ Max:100℃ |
Design pressure: | 3Bar |
Working pressure: | 1Bar |
Inner tank thickness: | 3mm |
Outer tank thickness: | 2mm |
Surface process of the tank: | Brushed surface |
Head type: | Dished head |
Bottom type: | Conical bottom,60°degree. |
Insulation material and thickness: | PU insulation,100mm |
Dimple jacket design pressure: | 2Bar |
Dimple jacket working pressure: | 1Bar |
Cooling jackets around the cylinder and bottom cone | |
Valves and fittings | Breath valve,Sample valve,Pressure gauge and Mechanical Pressure regulating valve |
Optional:
CO2 blow-off arm | |
Level tube | |
Dry hopping port | |
Carbonation device |