LC UPC 12core MPO MTP Cable Fiber Optical Patch Cord OM3 Mulit Mode Network
Product Description of MPO MTP Cable:
MPO MTP Breakout cable, a cost-effective alternative to time-consuming field termination, is designed for high-density fiber patching in data centers which need space saving and reduce cable management troubles. With US Conec MTP connectors and Corning Clearcurve fiber, it is optimized for 40G QSFP+ SR4 to 10G SFP+ SR, 100G QSFP SR4 to 25G SFP-25G-SR-S optics direct connection and high-density data center.
1-24 cores Special tube filling compound ensure a critical protection of fiber; special sesigned compact structure is good at preventing loose tubes from shrinkong;FRP used as the central strength member;Water-blocking tape enhancing moisture-proof.
Features of MPO MTP Cable:
- 4 fiber, 6 fiber, 8 fiber 12 fiber or 24 fiber is available
- 10G fiber or LSZH cable is available
- Excellent changeability and repeatability
- Tensile strength: 10NPC/UPC/APC polishing
- Fanout Length: 0.5M or 1M
- Compliance with Telcordia GR-1435-Core Compliant
- US Conec MTP/Senko MTP/OPTICO MPO connectors are available
- High quality ferrule and accurate alignment by PIN and PIN hole
- Low insertion loss and high return loss
- High interchangeability and durability
- MPO fiber optic patch cord comes in many types and design blueprint can be provided quickly.
- Compliant with Telcordia GR-326-CORE, IEC and RoHS standards
- 100% 3D tested/End surface tested/Loss tested/Polarization before delivery
- MTP is optional.
Application of MPO MTP Cable:
- Wiring in communication base station and distribution case
- Production and testing of optical devices
- Telecomunication Infrastructures
- LANs and WANs
- Optical fiber communication system, CATV and telecommunication network
- 10G to 40G , 25G to 100G migration
- FTTx
- Connection of indoor to outdoor optical cable wiring equipment
- For internal connection applications of optical transceivers, 40G/100G QSFP, QSFP+ and other optical transceivers.
- Data Centre Infrastructures
- Wiring of local area network between different enterprise buildings
- Connection of optical links in optical active devices
- Optical fiber to the building (FTTB) application;
Advantages of MPO MTP Cable:
- Support 12 to 72 core or even 96 core fiber connections.
- Easy management, high reliability, few fault points, fast wiring;
- Small size, the volume is smaller than the SC connector;
- High density, precise geometric design
Technical Specificaitons of MPO MTP Cable:
A.
| Connector Fiber Count | 8,12,24,32,48 Core |
| Polish | PC,APC | PC |
| Insertion Loss | Standard | ≤0.70dB | ≤0.50dB |
| Elite Low Loss | ≤0.35dB | ≤0.30dB |
| Return Loss | PC≥50dB,APC≥60dB | ≥30dB |
| Connector B:LC,LC Uniboot,SC,FC,ST |
| Polish | PC,APC | PC |
| Insertion Loss | ≤0.2dB | ≤0.2dB |
| Return Loss | PC≥50dB,APC≥60dB | ≥35dB |
| Durability(500 Matings) | ≤0.2dB |
| Test Wavelength | 1310/1550nm | 850/1300nm |
B.
| Type A | MPO MTP(Female) | Type B | MPO MTP(Female) |
| Fiber Type | OM4 50/125μm | Wave Length | 850/1300nm |
| 400G Transmission Distance | 100m@850nm | Fiber Type | Corning ClearCurve |
| Polish Type | APC-APC | minimum bend radius | 7.5mm |
| Insertion Loss | ≤0.35dB(Typical Value 0.15dB) | Return LossL | ≥20dB |
| Attenuation @850nm | ≤2.3dB/km | Attenuation@1300nm | ≤0.6dB/km |
| Diameter of outer sheath | 3.0 mm | Outer sheath material | Plenum (OFNP) |
| Installation tensile load | 100N | Long term tensile load | 50N |
| Operating Temperature | -10°C ~ +70°C | Operating Temperature | -40°C~ +85°C |
Production Process of MPO MTP Cable:
Other Type of MPO MTP Cable:
FAQ:
Q: Are you trading company or manufacturer ?
A: We are factory
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantit
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
Q: Do you accept OEM or ODM?
A: Yes,we're factory. any your customized requirements we can do our best to help you realize.
