Duplex OM4 Multimode Type B Fiber Optic Cable LC UPC LSZH Breakout Cable MPO
Product Description of MPO MTP OM4 Cable:
MPO MTP Breakout cable, a cost-effective alternative to time-consuming field termination, is designed for high-density fiber patching in data centers that need space saving and reduce cable management troubles. With US Conec MTP connectors and Corning Clearcurve fiber, it is optimized for 40G QSFP+ SR4 to 10G SFP+ SR, 100G QSFP SR4 to 25G SFP-25G-SR-S optics direct connection, and high-density data center.
MTP/MPO trunk cables connect MTP/MPO modules together as a permanent link. They facilitate rapid deployment of high-density backbone cabling in data centers and other high-density fiber environments, reducing network installation or reconfiguration time and cost. Its efficient plug-and-play structure dramatically reduces the initial installation and routine maintenance costs. Pre-terminated trunk cables can also be used with plug-and-play modules or MTP/MPO connector panels to achieve multi-level connection. Pre-terminated trunk cable can also be extended by
MTP/MPO panel with the plug-and-play module. They are used to interconnect module cassettes, panels, or ruggedized MTP/MPO fanouts.
Features of MPO MTP OM4 Cable:
- US Conec MTP® connector, Senko
- MPO Plus premiumconnector
- Corning Clearcurve® multimode fiber,
- SMF-28® Ultra optical fiber
- LC, SC, FC, ST connectors available
- OS2, OM4, OM3 available
- 0.35dB elite low-loss connector
- Customstaggering options available on tails
- Factory terminated and tested
- Pulling eyes are provided as an option to protect the fiber ends during installation
- PC/UPC/APC polishing
- Fanout Length: 0.5M or 1M
- Compliance with Telcordia GR-1435-Core Compliant
- High-quality ferrule and accurate alignment by PIN and PIN hole
- Low insertion loss and high return loss
- High interchangeability and durability
- MPO fiber optic patch cord comes in many types and design blueprints can be provided quickly.
- 100% 3D tested/End surface tested/Loss tested/Polarization before delivery
Application of MPO MTP OM4 Cable:
- 10G to 40G, 25G to 100G migration
- FTTx
- Connection of indoor to outdoor optical cable wiring equipment
- For internal connection applications of optical transceivers, 40G/100G QSFP, QSFP+, and other optical transceivers.
- Data Centre Infrastructures
- Wiring of local area network between different enterprise buildings
- Connection of optical links in active optical devices
- Optical fiber to the building (FTTB) application;
- Wiring in communication base station and distribution case
- Production and testing of optical devices
- Telecomunication Infrastructures
- LANs and WANs
- Optical fiber communication system, CATV, and telecommunication network
Advantages of MPO MTP OM4 Cable:
- Easy management, high reliability, few fault points, fast wiring;
- Small size, the volume is smaller than the SC connector;
- High-density, precise geometric design
- Support 12 to 72-core or even 96-core fiber connections.
Technical Specifications of MPO MTP OM4 Cable:
A.
| Type A | MPO MTP(Female) | Type B | MPO MTP(Female) |
| Fiber Type | OM4 50/125μm | Wave Length | 850/1300nm |
| 400G Transmission Distance | 100m@850nm | Fiber Type | Corning ClearCurve |
| Polish Type | APC-APC | minimum bend radius | 7.5mm |
| Insertion Loss | ≤0.35dB(Typical Value 0.15dB) | Return LossL | ≥20dB |
| Attenuation @850nm | ≤2.3dB/km | Attenuation@1300nm | ≤0.6dB/km |
| Diameter of the outer sheath | 3.0 mm | Outer sheath material | Plenum (OFNP) |
| Installation tensile load | 100N | Long-term tensile load | 50N |
| Operating Temperature | -10°C ~ +70°C | Operating Temperature | -40°C~ +85°C |
B.
| Description | Specification | Conditions |
| Connector LC/SC/ST/FC | Single-mode | Multimode |
| Polish | UPC | APC | PC |
| Insertion Loss | ≤0.3dB | ≤0.2dB | ≤0.20dB |
| Return Loss | ≥50dB | ≥60dB | ≥30dB |
| Test Wavelength | 1310/1550nm |
| Durability(500 Mating) | ≤0.2dB |
| Output power | ≤0.1dB |
| Salt Spray | ＜-20.2dBm |
| Operating Temperature | 0-70 ℃ |
| Storage Temperature | -20-85 ℃ |
| Standard compliant | Rosh, IEC, and GR-326 |
| Fire Resistant | IEC 60794-2-30 |
Production Process of MPO MTP Cable:
Other Types of MPO MTP Cable:
FAQ:
Q: Are you a trading company or manufacturer?
A: We are a factory
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity
Q: Do you provide samples? is it free or extra?
A: Yes, we could offer the sample for free but do not pay the freight cost.
Q: What are your terms of payment?
A: Payment<= 1000 USD, 100% in advance. Payment>= 1000 USD, 30% T/T in advance, balance before shipment.
Q: Do you accept OEM or ODM?
A: Yes, we're a factory. any of your customized requirements we can do our best to help you realize them.
