Large Water Softener Water Softener Gas Stove Soft Water Treatment Equipment Multi-Media Filter Active Carbon Filter

Product Attributes:

Processing customization:yes

Voltage:180 (V)
Working pressure:100-150 (Mpa)
Power:35 (w)
Rated flow rate:1-200 (T/H)
Inlet and outlet:10
Operating weight:100-1000 (kg)
Tank pressure:100 (MPa)
Working temperature:5-45 (° C)

How it works:
Large water softening equipment mainly uses ion exchange technology to remove hard minerals such as calcium and magnesium ions from water. The device contains one or more ion exchange resin beds that absorb calcium and magnesium ions from the water and release an equal amount of sodium ions to soften the water. Over time, the sodium ions in the resin bed gradually decrease and a regeneration process is required to restore its softening ability.

Equipment composition:
Large water softening equipment generally consists of the following parts:
Pump: Used to remove water from the source and feed it into the subsequent treatment process.
Filter: used to remove impurities and suspended substances in water to ensure the cleanliness of water quality.
Sodium chloride column (or ion exchange resin bed) : Calcium and magnesium ions are removed from the water by the ion exchange process to achieve softening of the water.
Membrane column (if any) : further reduces the concentration of ions in the water, making the water more gentle.
Controller: Used to control the operation of the equipment to ensure that each component works according to the set procedure to achieve the best purification effect.

Technical parameters:
The technical parameters of large water softening equipment may vary depending on the specific equipment model and application scenario, but generally include the following aspects:
Working pressure: usually between 0.15~0.5Mpa.
Regeneration mode: upstream or upstream (user can choose).
Operating temperature: 5℃~50℃.
Control mode: time control or flow control.
Power supply: 220V/50Hz.