Automatic Dumbbell Shape Sample Making Machine 1-50mm Sample Thickness/ Number control prototype

WZY-4030A Number control prototype is used to make all blocks or spline for material detection on non-metallic raw materials, which can process dumbbell, rectangular, round spline, can also process the gap for impact spline, can be irregular plane milling into flat plate

Using CNC technology to control the three-axis linkage system through the program controller, drive XYZ axis motor and supplemented by high-speed spindle motor to form a high-precision machining system, to realize the processing of various graphic samples.

Proctable graphics:

1. The dumbbell spline:

Support for almost all standard dumbbell type spline production. Dumbbell graphics program is built into the software, through the operation interface selection processing, without the user to prepare the processing program, the operation is easy, easy to learn. Special shape programs can be contacted by manufacturers for customization.

2. Rectangular spline:

The most common is the shock spline of 80 * 10. Select the rectangle processing in the software, input the length and width of the rectangle and other necessary parameters for processing.

3. Round sample block:

The most commonly used is the circular Vicat temperature test sample block. Select the circular processing in the software, input the diameter of the circle and other necessary parameters to be processed.

4.Straight cutting:

The cutting operation can be controlled manually, or the straight line processing function in the program can be used to realize the cutting operation of the plate.

5. Gap processing:

Support beam or cantilever beam will often open the standard gap. This machine is equipped with the standard gap milling cutters of R0.1, R0.25 and R1.00, which can produce the three types of gaps specified in the standard on the spline.

6. Flat milling:

The irregular material can be milling into flat plane machining in the software and input the length and width and thickness of the milling surface.

Standard configuration of equipment:

1. Industrial control machine touch screen control, realize linear motion, plug motion and other processing actions.

2. Electronic hand wheel. The equipment is standard equipped with electronic hand wheel to achieve accurate spindle position adjustment.

3. To the knife device. Z-axis to realize automatic Z-axis to knife, accurate and save time and effort.

4. Standard with single blade, double blade milling knife and gong knife, suitable for a variety of materials processing.

5. Configured with two kinds of tooling, one for the straight plate, a well type plate, suitable for different forms of material clip.

Featured function:

1. High machining precision, fast speed.

Process multiple splines at one time. For example, on the same piece of material processing dumbbell, rectangular, round, a processing is completed.

2.With the material water-cooling function. Hot and melted materials during processing can be cooled using cooling water.

3. Processing and compensation function. You can compensate for the error in which the material is heated expansion and the machining is compressed.

Main technical parameters: