Enclosed Belt Conveyor ISO CE Certification For Mining Ore Material
Introduction
Enclosed Belt Conveyor With Large Angle Skirt Board And Rubber Belt are the best solution for horizontal, sloping or vertical product transport. It adopts high quality conveyor belt with corrugated sidewall and horizontal baffle. Sidewall belt conveyor is widely applied in coal and wood-chip fired power stations, underground mining (coal and ore),steel industry, ship loading and unloading, foundry plants, silo feeding industry, waste recycling, soil purification and water treatment, etc.
Advantages and Features
1. Low maintenance cost.
2. Large transport capacity, and it can avoid material spilling effetely.
3. The belt can facilitate switching from horizontal to inclined conveying and from inclined to horizontal conveying.
4. It saves a lot space as it allows material conveying at 0-90 degree.
5. The sidewall belt conveyor is widely used in coal, food, building, chemical, water and electricity and metallurgy industry.
Working principle
The horizontal loading section leads a deflection wheel bends the belt into the feeding of the bulk material takes place on a mostly horizontal feed path, where the side wall belt is supported by loading impact idlers. The feeding of the conveyed material can be achieved by direct feeding from a hopper, over a chute, a feeding belt or a feeding pulley. The selection of the optimum feeding station depends on the properties of the bulk material and the belt speed of the vertical conveyor. The upward and downward strands are encased from the bottom to the top. Substructures or support rollers are not necessary in this section.
The vertical section leads over a deflection curve into the horizontal discharge section. The deflection curve is made up of a number of high specification pulleys. These pulleys experience the vectored load of deflecting the belt tension from vertical to horizontal.
At the drive pulley, the bulk material is discharged and the belt is returned to the back going strand. Depending on the bulk material properties, the drive pulley is followed by a beater wheel for belt cleaning in the return side. The beater is self-driven. Material that fails from the belt goes into the main delivery chute. Lateral deflection wheels turn the belt from the horizontal back to the vertical.
Tech data
Belt Width | Sidewall | Baffle | Effective | Particle | Speed | Capacity |
Height | Height | Width | Range (mm) | Range (m/s) | (m3/h) |
500mm | 80mm | 75mm | 250mm | 50-100 | 1.0-2.0 | 84 |
500mm | 100mm | 90mm | 250mm | 55-110 | 1.0-2.0 | 112 |
500mm | 120mm | 110mm | 250mm | 60-120 | 1.0-2.0 | 98 |
650mm | 100mm | 90mm | 350mm | 55-120 | 1.25-2.0 | 156 |
650mm | 120mm | 110mm | 350mm | 60-140 | 1.25-2.0 | 140 |
650mm | 160mm | 140mm | 300mm | 80-160 | 1.25-2.0 | 186 |
800mm | 120mm | 110mm | 460mm | 60-140 | 1.25-2.0 | 186 |
800mm | 160mm | 140mm | 410mm | 80-180 | 1.25-2.5 | 318 |
800mm | 200mm | 180mm | 410mm | 100-200 | 1.25-2.5 | 360 |
1000mm | 160mm | 140mm | 550mm | 80-180 | 1.25-2.5 | 428 |
1000mm | 200mm | 180mm | 550mm | 100-250 | 1.25-2.5 | 483 |
1000mm | 240mm | 220mm | 550mm | 140-280 | 1.25-2.5 | 683 |
1200mm | 160mm | 140mm | 690mm | 80-200 | 1.25-2.5 | 535 |
1200mm | 200mm | 180mm | 690mm | 100-250 | 1.25-3.15 | 765 |
1200mm | 240mm | 220mm | 690mm | 140-280 | 1.25-3.15 | 1077 |
1200mm | 300mm | 260mm | 640mm | 160-310 | 1.25-3.15 | 1358 |
1400mm | 200mm | 180mm | 830mm | 100-250 | 1.25-3.15 | 920 |
Selection Conditions
Selection Conditions
♦ Material to be processed: _____ | ♦ Max. granule size of the feeding material: _____mm |
♦ Handling capacity (Ps. It means the total | ♦ Percentage of Max. granule in material:_________% |
material capacity feeding from the inlet): _____t/h | ♦ Upstream equipment (Ps. It means what kind of |
♦ Bulk Density: _____t/m3 | equipment is used to feed the material): _____ |
♦ Material temperature: _____ºC; | ♦ Downstream equipment (Ps. It means what kind of |
♦ Water content:____% | equipment is used to discharge the material): _____ |
♦ Material is corrosive or not: ____ (Ps. Yes or No) | ♦ Working power supply: _____V ______HZ |
♦ Material is sticky or not: ____ (Ps. Yes or No) | ♦ Please refer to the following picture and provide the |
♦ Working environment is indoor or outdoor | relevant parameters:L1____m, L2___m, H___m, α____° |
or indoor and outdoor: ______________ | Working environment temperature: ______ ºC |

