Transmission Enclosed Belt Conveyor , Incline Conveyor Systems Vertical Product Transport
Introduction
Large Dip And Steep Angle Corrugate Sidewall Transmission Conveyor Belt With Carbon Steel Materials are the best solution for horizontal, sloping or vertical product transport. It adopts high quality conveyor belt with corrugated sidewall and horizontal baffle. Sidewall belt conveyor is widely applied in coal and wood-chip fired power stations, underground mining (coal and ore),steel industry, ship loading and unloading, foundry plants, silo feeding industry, waste recycling, soil purification and water treatment, etc.
Advantages and Features
1. Low maintenance cost.
2. Large transport capacity, and it can avoid material spilling effetely.
3. The belt can facilitate switching from horizontal to inclined conveying and from inclined to horizontal conveying.
4. It saves a lot space as it allows material conveying at 0-90 degree.
5. The sidewall belt conveyor is widely used in coal, food, building, chemical, water and electricity and metallurgy industry.
Tech data
Belt Width | Sidewall | Baffle | Effective | Particle | Speed | Capacity |
Height | Height | Width | Range (mm) | Range (m/s) | (m3/h) |
500mm | 80mm | 75mm | 250mm | 50-100 | 1.0-2.0 | 84 |
500mm | 100mm | 90mm | 250mm | 55-110 | 1.0-2.0 | 112 |
500mm | 120mm | 110mm | 250mm | 60-120 | 1.0-2.0 | 98 |
650mm | 100mm | 90mm | 350mm | 55-120 | 1.25-2.0 | 156 |
650mm | 120mm | 110mm | 350mm | 60-140 | 1.25-2.0 | 140 |
650mm | 160mm | 140mm | 300mm | 80-160 | 1.25-2.0 | 186 |
800mm | 120mm | 110mm | 460mm | 60-140 | 1.25-2.0 | 186 |
800mm | 160mm | 140mm | 410mm | 80-180 | 1.25-2.5 | 318 |
800mm | 200mm | 180mm | 410mm | 100-200 | 1.25-2.5 | 360 |
1000mm | 160mm | 140mm | 550mm | 80-180 | 1.25-2.5 | 428 |
1000mm | 200mm | 180mm | 550mm | 100-250 | 1.25-2.5 | 483 |
1000mm | 240mm | 220mm | 550mm | 140-280 | 1.25-2.5 | 683 |
1200mm | 160mm | 140mm | 690mm | 80-200 | 1.25-2.5 | 535 |
1200mm | 200mm | 180mm | 690mm | 100-250 | 1.25-3.15 | 765 |
1200mm | 240mm | 220mm | 690mm | 140-280 | 1.25-3.15 | 1077 |
1200mm | 300mm | 260mm | 640mm | 160-310 | 1.25-3.15 | 1358 |
1400mm | 200mm | 180mm | 830mm | 100-250 | 1.25-3.15 | 920 |
Selection Conditions
♦ Material to be processed: _____ | ♦ Max. granule size of the feeding material: _____mm |
♦ Handling capacity (Ps. It means the total | ♦ Percentage of Max. granule in material:_________% |
material capacity feeding from the inlet): _____t/h | ♦ Upstream equipment (Ps. It means what kind of |
♦ Bulk Density: _____t/m3 | equipment is used to feed the material): _____ |
♦ Material temperature: _____ºC; | ♦ Downstream equipment (Ps. It means what kind of |
♦ Water content:____% | equipment is used to discharge the material): _____ |
♦ Material is corrosive or not: ____ (Ps. Yes or No) | ♦ Working power supply: _____V ______HZ |
♦ Material is sticky or not: ____ (Ps. Yes or No) | ♦ Please refer to the following picture and provide the |
♦ Working environment is indoor or outdoor | relevant parameters:L1____m, L2___m, H___m, α____° |
or indoor and outdoor: ______________ | Working environment temperature: ______ ºC |

