Professional Small Vibrating Sturdy Screen Carbon Steel Frame High Precision
1. Brief Introduction
Llinear vibrating screen sieve is a high precision fine powder screening machine.The fundamental principle of vibrating screen sifter is that the unbalanced weight dropper installed on the top and bottom ends of motor changes the rotation motion of motor to horizontal, vertical and inclined three-dimensional motions, and then passes this motion to screen surface, achieving the purpose of classification, filtering and removal of impurities. Pineapple block linear vibrating screen sieve can be used for grain, powder, granule, flake, liquid materials.
2. Applications
1. Food industry
This linear vibrating screen can be used for handling starch powder, sugar powder, salt, rice flour, milk powder, soy bean milk, sauce, fruit juice, condiment, and so on.
2. Chemical industry
Our high efficiency screener is widely used for processing resin powder, paint, industrial chemicals, detergent powder, cosmetic, Chinese medicine powder.
3. Metallurgy industry
In metal processing industry, this linear vibrating screen can sift alluminium powder, lead powder, copper powder, alloy metal powder, electrode powder, manganese dioxide powder, electrolytic copper powder, abrasive powder, High temperature resistant material, kaolin, limestone, dolomite, alumina, calcium carbonate, quartz sand and so on.
3. Characteristics
The linear vibrating screen is composed of screen box, screen frame, vibration motor, shock absorber and machine base. The two same vibration motors, as the vibration providers, are fiexed on the top of screen box. They rotate synchronically in reverse directions.
The eccentric blocks driven by the motors could provide centrifugal force, whose component force moves back and forth along the casting direction. Thus the screen device supported by the shock absorbers can move linearly. And the material on it moves forward straightly when tossed upward. When falls into the screen frame again, the material will move forward quickly and penetrate the screen in a fluffy state. Desirable screening performance can be achieved simply by choosing suitable screens for the linear vibrating screen.
4.Matters needing attention
1. Once the machine on operation, the vibration part shall not be connected or contact with any object.
2. When feeding materials, pay attention to ensure the uniform feeding.
3. When the material through down, keeping no big impact to damage the screen.
4. Before operation and power off, there should no be any material on screen surface.
5. If there is any abnormal sound in the operation, the machine should be shutdown immediately and to check.
6. Ensure vibration motor maintenance regularly.
5.Tech Data
Model | Screen Surface Size | Screen Cloth Aperture | Capacity | Vibration Frequency | Power | Screen Surface Inclination |
(mm) | (mesh) | (t/h) | (r/min) | (kw) | (degree) |
ZS-520 | 500*2000 | 2-325 mesh | ≤ 5 | 1460/960 | 0.4*2 | 0-10° |
ZS-525 | 500*2500 | ≤ 8 | 0.55*2 |
ZS-1020 | 1000*2000 | ≤ 12 | 1.1*2 |
ZS-1025 | 1000*2500 | ≤ 16 | 1.1*2 |
ZS-1030 | 1000*3000 | ≤ 20 | 1.5*2 |
ZS-1224 | 1200*2400 | ≤ 23 | 1.5*2 |
ZS-1525 | 1500*2500 | ≤ 28 | 2.2*2 |
ZS-1530 | 1500*3000 | ≤ 32 | 2.2*2 |
6.Feature
1. The screening precision is great, while the blocking rate of screen is less than 10% in average.
2. The screen frame is usually made of wood, or steel or stainless steel. If the mesh diameter is large than 2 mm, and the production capacity is high, the stainless steel frame will be better.
3. Enclosed structure is adopted for the linear vibrating screen to avoid particulate matter pollution to the air.
4. The low energy consumption and low noise(73-80 dB) make the machine quite eco-friendly.
5. The screen is woven by stainless steel wire, so its service life is quite long and the maintenance is simple. It can be used in single layer for multi-layer(7 layers at most).
6. The motor could be mounted eighter at the bottom or on the side of the vibrating body.
How to get one set of linear vibrating screen separator? Only by telling us the following information for selection:
1. Material |
Name of material |
Characteristic of material, such as water content, size of material, specific gravity |
2. Machine |
Capacity per hour you asked |
How many layers you asked |
Sieve mesh for each layer |
3. Working situation |
Voltage, Hertz, Phase |
