Normal Temperature 16L/R Ajustable Speed Impeller Feeder Rotary Valve

I. Characteristics of Impeller Feeder / Rotary Valve

The impeller feeder / Rotary Valve's structure is closed, the shape is beautiful and use very convenient.The operation is very stable and the noise is low. Due to the bearing and tooth box are some distance from the shell, the high temperature lubrication has been greatly improved.

Our factory can also be designed and produced according to the requirements of users.

II. Working principle and structural characteristics of Impeller Feeder / Rotary Valve

The impeller feeder/ rotary valve is mainly made uo by motoro,reducer,shell, transmission shaft,impeller and end cover. Because the bearing and reducer of the machine are protruding outward, the phenomenon that dust can be squeezed into the bearing and large particle material can be avoided. When rotary valve working, the deceleration motor drives the impeller to rotate through the coupling, the material in the upper part of the shell is brought evenly to the lower part, and the material is transported away by the next device.

III. Instructions for use of Impeller Feeder / Rotary Valve

1. The safety should be paid attention to when starting, and the hand should not be extended to the rotor part.

2. Check whether the motor wiring is correct and reliable before use, and whether to install overload protection.

3. This product has been added No. 00 lithium grease before leaving the factory.

4. This product is suitable for powder dry materials and fine particle dry materials, such as high viscosity and high humidity materials, high temperature materials need to be customized separately.

IV. Technical Datas of Impeller Feeder / Rotary Valve

YJD B Model Impeller Feeder / Rotary Valve Parameter

YJD B Impeller Feeder / Rotary Valve Size

FORM1 mm

FROM2 mm