PBJ-3 belt peeling machine
Features:
The belt peeling machine is used to fasten and clean the rubber layer on the head of the conveyor belt during the preparation of the belt joint.
Instructions:
1. According to the conventional method, center the conveyor belt, cut the corresponding joints with a knife and separate the first layer;
2. Put the belt peeler in place and secure it with a wire rope;
3. Power on
4. Clamp the separated first layer with a clamp, start the motor, and cut the peeled part in an appropriate place with a cutter;
5. After the first layer is peeled off, repeat the above related steps to peel off the second and third layers, respectively.