Electric Heating Conveyor Belt Hot Vulcanizing Machine Remote Control

Characteristic features:

1. Voltage:according to your actual conditions;
2. Vulcanizing temperature:Can be arbitrarily adjusted within 0~200°C
3. Temperature-rising time:not exceeding 50 min (from normal temperature to vulcanizing temperature)
4. Vulcanizing pressure:1.8Mpa
5. Keeping time of vulcanizing temperature can be adjusted according to the thickness of the rubber belts
6. Length of the joint of the vulcanized rubber conveyer belts can be arbirtarily joined-u with single set of multiple sets of vulcanizing machine as required
7. When ordering please clarify the model and specification of the products,and specify the width the tensile strength and the required vulcanizing joining-up pressure in Kg of the rubber conveyer belts

Application of rubber belt vulcanizer :

1. Steel Cord Belt Intermediate Rubber is an uncured rubber for hot vulcanized belt splicing.

2. It is designed to use as an inter-core cord rubber replacement material in splicing steel cord conveyor belts or a tie gum in fabric belts.

3. The material is designed to bond to cured intercore rubber and wire cords in all standard grade steel cord conveyor belts, as well as fabric belt cured skim rubber and general bond improvement material for general grade fabric conveyor belts.

Technical Parameters:

* Vulcanizing temperature: 145ºC (adjustable 0~200ºC)
* Temperature-rising time (from normal temp to vulcanizing temp):≤50 mins(around 25~30 mins normally)
* Improved cooling system: using pressure pump for cooling:only 5mins (cooling from 145 to 75 degrees)
* Belt width: from 650mm to 3000mm 200PSI Almex alike Uniform Pressure Bag for Conveyor Belt Press
* Degree of the heating platen:22 °/17 °/ 20 ° (rectangle and other degree is optional)
* Waterbag/ air pressure Press for 100PSI, 200PSI etc.
* Surface pressure for textile and steel cord belts, Up to 1.8Mpa.
* 100 p.s.i. (7 kg/cm sq.) units suitable for splicing fabric ply belting
* 200 p.s.i. (14 kg/cm sq.) units suitable for splicing steel cord conveyor belting
* Customization/OEM:Different heating platen size and combination

Portable Water-Cooled Rubber Belt Vulcanizing Machine and heating plates with silicone heating mats have newly been developed and distributed by RUNNING AMCHINE CO., Characterized by highest quality features and application-oriented design, they are suitable for splicing of fabric- and steel cord conveyer belts.

Since 2004, RUNNING MACHINE has developed the “Pressure Bag” uniform pressure system, which is an innovation of outdated heavy press bags. It is 4 times lighter than the outdated pressure bag.

A whole piece of vulcanized rubber is used for sealing, isolation, rust prevention, without any splicing area, ensuring safety during the operation.

The pressure bag can be fully expanded in one time to ensure that the uniform pressure reaches 3.0MPa, which fully meets the requirements of belt vulcanization.

For outdated press bags, the thickness of the press bag frame is only 2cm instead of 5cm, which increases the pressure area.